Related Manuals for anko BL1015-GS
Summary of Contents for anko BL1015-GS
- Page 1 Blender BL1015-GS User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using the electrical appliance, the below basic safety precautions should be followed: 1. Read all instructions. 2. Before using check that the voltage power corresponds to the one shown on the appliance nameplate. 3. Do not let cord hang over edge of table or counter. 4. - Page 3 13. Turn all controls to OFF/STOP and unplug the blender when it is not in use, before putting on or taking off parts, and before cleaning. IMPORTANT! Never leave the appliance unattended during use. 14. To protect against risk of electrical shock do not put motor unit or power cord in water or other liquid.
-
Page 4: Know Your Blender
CAUTION: Be careful when opening the jar lid after blending hot liquids. Hot liquid may eject out of the appliance due to sudden steaming and cause scalding. 28. Switch OFF the appliance and disconnect from mains power supply before changing accessories or approaching parts that move in use. - Page 5 Resettable fuse button Function switch: With “Soup” and “Pulse” for selection. Speed dial: Turn the dial to choose from manual speed settings from “Low” to “High”. Once you select a speed, the blender will run until you turn it back to “STOP”. Tamper: The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot be processed in a regular blender.
-
Page 6: Operation
FOR THE INITIAL USE 1. Unpack the appliance and place all parts on a horizontal surface. 2. Immerse the jar, jar lid, measuring cup and tamper in warm soapy water and rinse them and dry. Never immerse motor unit in water for cleaning to prevent the risk of electric shock. CAUTION: The blade is very sharp, please handle carefully. - Page 7 3. Connect the appliance to mains power, and then push the power switch to “ON” position. 4. Turn the speed dial to the “HI” speed setting and the appliance will start to blend. 5. After blending for about 30 seconds, turn the speed dial to “STOP” position. 6.
- Page 8 CRUSHING ICE 1. Place the appliance on the flat horizontal surface and make sure it is not connected to mains power. 2. Use ice cubes approximately 15mm*15mm*15mm in size. Remove the measuring cup and jar lid and place the ice cubes in the jar. It is recommended to add water to facilitate the smooth running of the appliance.
- Page 9 4. After finish blending, move the jar out of the jar support pad, and then carefully remove the measuring cup and jar lid, then pour and serve. CAUTION: The speed dial and power switch must be at “STOP” and “OFF” positions and the power supply cord must be disconnected from mains power outlet before removing the jar.
- Page 10 Recipe for Bacon cheedar cheese and potato soup Ingredients： cup（560ml）milk 2 medium potatoes, 12oz (340g), baked 30 minutes, cut into half 2/3 cup（80g）cheese, sliced 1/4 cup（40g）chopped onion, cook (and stir) for 10 minutes or until onions are golden 1/2 tsp dry fennel 1/2 tsp salt 1oz（28g）Bacon, cooked well, chopped Operation：...
-
Page 11: Cleaning And Maintenance
CAUTION: The food will be hot after soup blending process. Take extreme care when removing the jar lid as hot ingredients may eject out of the appliance due to a sudden steaming and cause scalding. IMPORTANT! Children should be supervised to ensure that they do not play with the appliance. -
Page 12: Technical Specification
WARNING: 1) The blade is very sharp, handle carefully when cleaning. 2) Do not use abrasive cleaners. Never immerse the Motor Unit in water for cleaning. TECHNICAL SPECIFICATION Voltage: 220-240V~ 50-60Hz Power: 1500W Jar Max. Capacity: 2000ml 12 MONTH WARRANTY Thank you for your purchase from Kmart.
Need help?
Do you have a question about the BL1015-GS and is the answer not in the manual?
Questions and answers