Subscribe to Our Youtube Channel
Related Manuals for anko BL1703A-SA
Summary of Contents for anko BL1703A-SA
- Page 1 Blender BL1703A-SA User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using the electrical appliance, the below basic safety precautions should be followed: 1. Read all instructions. 2. Before use check that the voltage power corresponds to the one shown on the rating label found on the appliance. 3. - Page 3 18. Do not use outdoors. 19. Keep hands and utensils out of the blending jug while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.
-
Page 4: Know Your Blender
KNOW YOUR BLENDER Fig. 1 Fig. 2... -
Page 5: Electrical Specification
Electrical Specification Operating Voltage Frequency Power Function Rest period Time Capacity 220-240V 50-60Hz 700W Pulse/blend 1 minute Min. 2 minutes 1500ml 220-240V 50-60Hz 700W Ice crush 3 seconds Min. 3 seconds 150g BEFORE FIRST USE 1. Before first use, unpack the appliance and place all parts on a horizontal surface. 2. - Page 6 OPERATION INSTRUCTIONS 1. Peel or core the fruit or vegetables and then cut them into small pieces. Place the food to be blended into the jar（See Fig.6）. Add some purified water to facilitate the smooth running of the blender. The proportion of the food and water should be 2:3.
-
Page 7: Cleaning And Maintenance
2. Blades are very sharp. Handle with care. 3. Do not operate without the jar cover in place. 4. Do not attempt to disassemble the power base. 5. Cleaning and user maintenance should not be made by children without competent adult supervision. -
Page 8: Technical Specification
4. Dry all parts and then reassemble them. The method of assembling blender attachment is just opposite of its detaching sequence. NOTE: If you encounter any problem during use, never attempt to disassemble the Motor Unit by yourself. There are no user serviceable parts inside. Any repairs to the appliance must be carried out by a qualified electrical person only. - Page 9 12 MONTH WARRANTY Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the BL1703A-SA and is the answer not in the manual?
Questions and answers
Blad was lock could not spinning when switch on.
The blade on the anko BL1703A-SA may not be spinning when switched on due to one or more of the following reasons:
1. The appliance is not assembled correctly — the jar cover or blade assembly may not be properly secured.
2. The appliance is not plugged in or the Speed Selector is still in the “OFF” position.
3. The supply cord is damaged, which would prevent power from reaching the motor.
4. The appliance has malfunctioned or is damaged and should be examined or repaired only by a qualified electrical person.
5. The jar is overloaded or the contents are preventing the blade from moving.
Ensure proper assembly and check electrical connections before use. If the problem persists, stop using the appliance and seek qualified repair or disposal.
This answer is automatically generated