Subscribe to Our Youtube Channel
Related Manuals for anko 42827A0
Summary of Contents for anko 42827A0
- Page 1 Multi Function Digital Blender 42827A0 User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
- Page 2 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire. Electric shook and injury to persons, including the following: This appliance is for household use only, not designed for commercial use. ...
- Page 3 WARNING! 1. After using the soup function, after one cycle, allow the electric motor unit to cool down approx. 20 minutes before using it again. 2. Except for the soup function (approx. 8 minutes), the maximum operating time for other functions are 1 minute. After one cycle, allow the electric motor unit to cool down for at least 1 minute before using it again.
- Page 4 KNOW YOUR MULTI FUNCTION DIGITAL BLENDER Part A: 1 Measuring cup (1x) 2 Jug Lid (1x) 3 Blender jug / Soup jug, 1200ml (1x) 4 Blade attachment (1x) 5 Electric motor unit (1x) 6 Control panel 7 Operating light 8 Suction feet 9 Seal Lid (2x) 10 Large cup, 1000ml (1x);...
- Page 5 Part B: CONTROL PANEL A– Display B– Function- Program selection by pressing repeatedly C– Star t/Stop Switch the device on / off and star t / stop the program CAUTION: Danger of suffocation! Keep children and animals away from the packaging material.
- Page 6 1. Make sure that the sealing ring is correctly inserted in the groove on the plastic blade housing. 2. Screw the blade attachment (4) onto the blender/soup jug (3) or the cups (10, 12). Check that it fitted correctly. IMPORTANT! DO NOT operate the blender without any food in the blender/soup jug or small or large cup.
- Page 7 1. Unscrew the lid (13) of the large cup (10). 2. Fill the ice tube (11) with ice cubes and insert it into the large cup (10). 3. Screw the lid (13) back onto the large cup (10). Seal Lid The seal lid is not suitable for the transport of liquids, it is not leak proof.
- Page 8 • Do not overfill! Make sure that the maximum fill level (MAX marking in the cup / blender/soup jug) is not exceeded. • Danger of damage from incorrect use of the accessories! The device should only be used if it has been completely and correctly assembled! •...
- Page 9 8. You can select the program you want by repeatedly pressing the Function button (B). On the display (A) an arrow points to the chosen program and the duration of the respective program is shown. 9. To start the program: Hold the motor unit (5) securely with one hand and press the Start / Stop button (C) once.
- Page 10 Place the motor unit (5) on a flat and stable surface: o The surface must be dry. o The suction feet on the bottom of the appliance must stick to it firmly. o Make sure that there is a sufficient gap from the edge of the work surface so that the device does not fall off during operation.
- Page 11 The blades are very sharp. Never touch with bare hands. Always hold the blade attachment firmly by the plastic housing. • Surfaces could be damaged! Do not use any caustic or abrasive cleaning agents or scouring sponges to clean the device. 1.
- Page 12 STORAGE 1. Unplug and clean unit. 2. Store in original box or in a clean, dry place. 3. Never store the blender while it is hot or while connected to mains power. 4. Never wrap the cord tightly around the appliance. Never place any stress on the power cord, especially where the cord enters the unit, as this could cause the cord to fray and break.
Need help?
Do you have a question about the 42827A0 and is the answer not in the manual?
Questions and answers
how to operate max1200ml
To operate the anko Max 1200ml blender, follow these steps:
1. Place on a Stable Surface – Ensure the suction feet stick firmly to the surface.
2. Select a Cup – Choose either the small (500ml) or large cup (1000ml). If using the large cup, you can attach the ice tube if needed.
3. Add Ingredients – Pour ingredients into the cup without exceeding the MAX marking.
4. Attach Blade – Screw the blade attachment clockwise onto the cup.
5. Secure to Motor Unit – Turn the cup upside down, place the blade attachment into the motor unit, and twist clockwise to lock it in place.
6. Plug In – Insert the power cord into an accessible mains power socket.
7. Turn On – Press the Start/Stop button once. The operating light will flash, and the display will switch on.
8. Select a Program – Choose the desired program by repeatedly pressing the selection button.
9. Blend – The blender will operate as per the selected program.
10. Turn Off – Press the Start/Stop button again when blending is complete.
11. Remove and Clean – Unplug the blender, detach the cup, and clean as instructed.
Caution: Never blend hot food or liquids above 50°C in the small or large cups.
This answer is automatically generated