Subscribe to Our Youtube Channel
Related Manuals for anko BL2006-SA
Summary of Contents for anko BL2006-SA
- Page 1 Portable USB Blender BL2006-SA User Manual PLEASE READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS 1. Please read all instructions carefully before using this product. 2. When the product is in use do not remove main unit from the juice cup. 3. During use to avoid injury and/or damage to the product do not touch moving parts, such as blades and motor. - Page 3 13.Use of accessories not recommended or supplied with the product may cause fire, electric shock or personal injury. 14. For electrical safety, any repairs to the product should be carried out by a qualified electrical person only or the product must be disposed. 15.
- Page 4 1. Do not immerse the main body (electric motor) on the appliance into the water or other liquid. 2. WARNING: Do not put hot ingredients or liquid above 55 °C in the juice cup to avoid bursting, splashing and to prevent scalding. 3.
-
Page 5: Product Introduction
c) Charging time may be longer when the room temperature is below 10 °C, which is a normal. d) Charge the battery in time when the battery power goes low. WARNING: The maximum operating time is 40 seconds. Allow it to rest for at least 3 minutes before using it again. -
Page 6: Charging Mode
CHARGING MODE: a. When the product is charging, the LED indicator light will light up in red. b. When fully charged, the LED indicator light will light up in white. WORKING MODE: There is only one speed. The specific functions are as follows: ①... -
Page 7: Before First Use
IMPORTANT! THE USB BLENDER IS DESIGNED FOR BLENDING OF SOFT FRUIT AND VEGETABLES ONLY. IT IS NOT DESIGNED FOR CRUSHING ICE, THICK MIXTURES AND BLENDING OF HARD ITEMS SUCH AS NUTS, SEEDS etc. OPERATION INSTRUCTIONS BEFORE FIRST USE Before using this product for the first time, please use soap and warm water to clean the the juice cup and the blade on the main machine, and dry it thoroughly;... - Page 8 2.Put the cut fruit into the juice cup, add water or milk and other liquids. The total amount of food and liquid should not exceed the maximum mark (300ml) on the cup. 3.The main unit is rotated and installed on the juice cup. The main unit and the juice cup should be tightened and installed correctly to ensure it does not leak.
- Page 9 5. After mixing and making the juice, rotate and remove the juice cup from the main unit. 6.The juice cup can be used as a cup for drinking. 6. The supplied charging cable should be inserted into the standard USB power source rated at DC5V/1A specification, and the magnetic connector of the charging cable should be connected to the charging inlet on the main unit to charge the product.
-
Page 10: Cleaning Method
CLEANING METHOD 1. Make sure the blade has come to a complete stop before cleaning. 2. Do not use a steel ball, abrasive cleaner or corrosive liquid (such as gasoline, acetone) to clean the product. 3. The main unit can be wiped with a wrung wet cloth; do not rinse, soak or spray water or other liquids to avoid damage to the device. -
Page 11: Troubleshooting
TROUBLESHOOTING Symptom Possible cause Solution Please wait for the motor to Is it used continuously for a long time? cool down before using. Is the food stuck on the blade? Remove the remaining food Product does not ... - Page 12 12 Month Warranty Thank you for your purchase from Kmart. Kmart Australia Ltd warrants your new product to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided.
Need help?
Do you have a question about the BL2006-SA and is the answer not in the manual?
Questions and answers