Table of Contents
Advertisement
Playing Back the Autostart Recording
By playing back the autostart recording, you can pause
or go back the TV program you are currently watching.
For the autostart recording refer to "AUTOSTART
RECORDING" on page 48.
To pause and resume the TV program:
1) When watching TV program through this unit's
tuner, press [PAUSE F].
TV program will be paused and sound will be muted.
2) Press [PLAY B] to resume the TV program you were
watching from where you have paused.
To go back the TV program:
When watching TV program through this unit's
tuner, press [SKIP H], [REV E] or
[VARIABLE REPLAY
• While playing back the autostart recording, pressing
[SKIP H] or [SKIP G] skips playback point 5
minutes backward or forward.
To go back to the specific time:
1) When watching TV program through this unit's
tuner, press [DISPLAY], then press [ENTER].
2) Use [K / L / { / B] or [the Number buttons] to
enter a desired time, then press [ENTER].
• While playing back the autostart recording, press
[STOP C] to cancel the playback.
• When watching TV program or while playing back the
autostart recording, press [DIPLAY] once to display
the autostart recording information. Refer to
"Autostart Recording Information" on page 23.
• Noise reduction, zoom and virtual surround functions
are available while playing back the autostart
recording.
Note
• While playing back the autostart recording, you
cannot change the channels.
• While playing back the autostart recording, you
cannot change the DTV audio language.
• If you change to DVD mode or if the timer recording
starts while playing back the autostart recording, the
playback will be stopped.
• When this unit turns on for the timer recordings, the
autostart recording will not be performed.
• For the contents of the autostart recording, you
cannot change the TV audio.
70
70
EN
EN
SPECIAL PLAYBACK
].
Advertisement
Table of Contents
