Dubbing; Information On Dubbing; Before Starting Dubbing - Sylvania H2160SL9 Owner's Manual

Hdd & dvd player / recorder with digital tuner
Table of Contents

Advertisement

Information on Dubbing

You can dub the contents of the HDD to DVD or vice
verse. Before you start dubbing, refer to pages 10-11 to
see the recording compatibility.
Guide to Dubbing Menu Display
1
HDD
DVD
Add
2
Delete All
Dubbing Start
1 Dubbing direction
2 Dubbing menu
3 Remaining recordable space
4 Dubbing list
5 Current page number / total number of pages
Recording Mode for Dubbing
"High"
This unit is compatible with the high speed dubbing from
HDD to DVD or from VR mode DVD-RW to HDD.
With the high speed dubbing you can dub a title much
faster than the normal speed dubbing without changing
the quality of the picture and sound. (e.g. If you dub a
title recorded in SLP mode to DVD-R, dubbing speed will
be 32 times faster than the normal dubbing.) To perform
the high speed dubbing, set the recording mode to
"High".
• Duration of high speed dubbing will vary depending on
the recording mode or the title amount.
• High speed dubbing is not available when;
- recording mode is set to other than "High".
- dubbing from a video mode DVD-RW/-R to the HDD.
- there is not enough space in the disc or HDD.
• High speed dubbing of an HDD title which has bilingual
audio is only available to VR mode DVD-RW disc.
"Auto"
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
selects the best recording mode available automatically.
• The recording may be cut short when the available
recording space of the disc is too limited.
58
58
EN
EN

DUBBING

3
3000 MB
Dubbing List
4
5
1/1
Note on dubbing
• During normal dubbing, you can watch the playback
picture of the title being dubbed (the audio cannot
be changed). During high speed dubbing, the
playback picture will not appear.
• Dubbing of a copy-once programs are only available
when you dub HDD to DVD-RW disc with Content
Protection for Recordable Media (CPRM) formatted in
VR mode, and in this case, the programs does not
remain on the HDD.
• If you stop the dubbing halfway, the contents will be
dubbed up to the point where you stop the dubbing
(except for the high speed dubbing). With high
speed dubbing, nothing will be dubbed if you stop it
halfway.
• To stop the dubbing in progress, press [C STOP] on
the front panel or press [STOP C] for 2 seconds on
the remote control. If you stop the high speed
dubbing or stop the dubbing a copy-once programs,
confirmation message appears. Select "Yes" using
[K / L], then press [ENTER] to proceed.
Other recording modes
Refer to page 44 for the information on other recording
modes.

Before Starting Dubbing

HDD to DVD / DVD to HDD
You can copy the contents between HDD and DVD.
Limitation (DVD to HDD):
• If a copy control signal is detected during dubbing,
the dubbing will be stopped.
Preparing for dubbing (HDD to DVD):
• Insert a recordable DVD.
Preparing for dubbing (DVD to HDD):
• Insert a disc to be dubbed.
• Discs dubbed with other devices may not be dubbed.

Advertisement

Table of Contents
loading

Table of Contents