Cleaning The Suction Openings Of The Fl Oor Vacuum Cleaner; Cleaning The Brush And Fl Oor Tool - Easy@Home MD 18418 H Manual

2-in-1 rechargeable vacuum cleaner

Table of Contents

− Empty the dust container into a rubbish bin.

− Clean the coarse and dust ﬁ lter plus dust container regularly under running

water. It is not necessary to clean with water each time. Do not put the dust

container into a dishwasher!

− Reinsert the ﬁ lters once the dust container and ﬁ lters are dry again.

− Place the dust container on the motor base by ﬁ rst placing it on the locking lug

under the motor block and then folding shut until the unlock button audibly

latches into place.

NOTICE!

Risk of damage!

Improperly assembling the ﬁ lter and dust container can cause

damage to the ﬂ oor vacuum cleaner.

− Make sure the dust container ﬁ lters are correctly installed

before use.

Cleaning the suction openings of the ﬂ oor vacuum

cleaner

Dirt and dust may accumulate around the suction openings of the ﬂ oor vacuum

cleaner after some time, which may reduce the suction power. To prevent this, the

suction openings should be cleaned at regular intervals.

− Switch the appliance off. Remove the handheld vacuum cleaner from the

housing.

− Remove dirt and dust from the suction openings of the ﬂ oor vacuum cleaner,

ﬂ oor tool, suction tube on the ﬂ oor vacuum cleaner as well as the crevice tool and

upholstery brush.

Cleaning the brush and ﬂ oor tool

You can remove the brush of the ﬂ oor tool

− Push the locking bar

ﬂ oor tool and remove the bar. (Fig. E)

− Take off the brush, remove coarse ﬂ uff and clean the brush under running water.

− After drying, reinsert the brush in the reverse order and secure the locking bar.

− Then reassemble the ﬂ oor vacuum cleaner as described above.

for the cleaning brush toward the front edge of the

for cleaning:

Cleaning and care

Table of Contents

Show Quick Links

Table of Contents