Cleaning The Carpet Cleaner; Storage - Easy@Home VC9389 User Manual

Storage

5. With the dirty water tank still removed, pull out the motor filter
with warm water (see Step 3).
Allow it to dry thoroughly when storing the carpet cleaner.
6. Replace the filter and put the dirty water tank back into the carpet cleaner as
described in the chapter "Emptying the dirty water tank."
Step 1

Cleaning the carpet cleaner

1. Unplug the carpet cleaner.
2. Make sure the water solution tank
(see chapter "Emptying the dirty water tank").
3. Use a soft damp cloth to wipe off the carpet cleaner and accessories. Then let all
parts dry completely.
Storage
NOTICE!
Risk of damage!
Mineral deposits and mildew can form when cleaning solution and/
or water is left in the tanks, affecting the performance of the carpet
cleaner.
− Do not store the carpet cleaner with cleaning solution left in
the water solution tank or dirty water left in the dirty water
tank.
All parts must be completely dry before being stored.
− Always store the carpet cleaner in a dry area.
− Protect the carpet cleaner from direct sunlight.
− Store the carpet cleaner so that it is not accessible to children.
16
19
Step 2
4 and the dirty water tank
20 and rinse it
20
Step 3
7 are empty