Function Overview; Rear Terminals; Front Panel Display; Hdmi Setup - Sylvania DP170SL8 Owner's Manual

Function Overview

Rear Terminals

1
L
R
AUDIO
OUT
1: AUDIO OUT jacks
Connect an RCA audio cable from here to the audio input jack of
your television or audio device.
2: COMPONENT VIDEO OUT jacks
Connect component video cables from here to the component
video input jacks of your television.
3: S-VIDEO OUT jack
Connect an S-video cable from here to the S-video input jack of
your television.
4: HDMI OUT jack
Connect an HDMI cable from here to the HDMI compatible port
of a television or other display device.

Front Panel Display

PLAY STOP OPEN/CLOSE
POWER SKIP SKIP
Lights up when the
A-B repeat function
is on.
Lights up when the
repeat function is on.
Lights up when
the ALL repeat
function is on.
Lights up when the
inserted disc comes
to a pause.
Lights up when playing back
in slow mode. (DVD)

HDMI Setup

Press [HDMI] on the remote control to select the HDMI output
mode. The output mode changes as follows every time [HDMI] is
pressed.
480P 720P 1080I
480P (Default): Video output from the HDMI OUT jack at 480p.
720P: Video output from the HDMI OUT jack at 720p.
1080I: Video output from the HDMI OUT jack at 1080i.
1080P: Video output from the HDMI OUT jack at 1080p.
hdOFF: No video output from the HDMI OUT connector.
2
Y
C /P COMPONENT VIDEO OUT
R R
COAXIAL
VIDEO DIGITAL
C /P HDMI OUT
B B
OUT AUDIO OUT
6 5 4
PROGRESSIVE DVD/CD PLAYER
Displays a type of the disc
which is inserted on the tray.
• DVD: DVD, DivX® on DVD
• CD: audio CD, MP3,
Kodak Picture CD,DivX® on CD
Lights up when the
progressive scan
system is activated.
GROUP P.SCAN
DVD
CD
Displays how long the current title or track
has been played back. When a chapter or track is
switched, the number of a new title,
chapter or track is displayed.
Selected HDMI output mode is displayed.
Lights up when the inserted
disc is being played back.
1080P hdOFF
3
S-VIDEO
OUT
5: DIGITAL AUDIO OUT COAXIAL jack
Connect a digital audio coaxial cable from here to the digital
audio input jack of your digital audio receiver.
6: VIDEO OUT jack
Connect an RCA video cable from here to the video input jack of
your television.
Note:
• Please purchase the necessary cables at your local store.
(Refer to pages 6-8.)
Note:
• Video and audio signals may distorted temporarily when
switching to/from the HDMI output mode.
• Use a display with an HDMI-compatible port.
• You can check the HDMI connection status by pressing
[DISPLAY] during playback with the HDMI output mode (refer
to page 7).
• If the TV is not compatible with newly selected HDMI output
mode, the actual output mode will be kept the one before
changing the selection. When this occurs, the newly selected
mode will appear on the front panel display while the actual
output resolution will be indicated by performing the
on-screen display as described above.
– 9 –
Power on
No disc inserted or
cannot read
Tray open
Tray closed
Loading the disc
Power off
HDMI output mode
(480p) is selected
HDMI output mode
(720p) is selected
HDMI output mode
(1080i) is selected
HDMI output mode
(1080p) is selected
HDMI output mode
(OFF) is selected
EN