Summary of Contents for LED IT REDA SOLAR
- Page 1 REDA SOLAR User Manual LED IT COMPANY LIMITED Room A, 21/F, Gaylord Commercial building, 114 -118 Lochkart Road, Wanchai, Hong Kong REDA SOLAR User Manual Contact : sales@leditinternational.com Subject to change without notice.
- Page 2 REDA SOLAR to the metal clips REDA SOLAR with the Tensioning bolt. Note : This is only to secure the REDA SOLAR, so it cannot be removed - Do not stress it tightening it too much. Connect the MC4 Connectors to the Solar panel.
- Page 3 REDA SOLAR User Manual M6 16 Screws This is to fix to solar panel M6 16 Screws Can fix in different holes for different mounting angle M8 16 Screws *Please note the brackets for left and right sides are different, make sure it is assembled properly.
-
Page 4: Finished Assembly
REDA SOLAR User Manual Finished assembly LED IT COMPANY LIMITED Room A, 21/F, Gaylord Commercial building, 114 -118 Lochkart Road, Wanchai, Hong Kong REDA SOLAR User Manual Contact : sales@leditinternational.com Subject to change without notice. -
Page 5: Remote Control
REDA SOLAR User Manual REMOTE CONTROL Magic Remote Control Manual The magic remote control is specially developed for solar luminaries. It offers a combina- tion of many lighting modes to satisfy a wide variety of different lighting applications. In addition to allowing users to easily set the power @ 20%, 40%, 60% or 100%, it also changes the lighting time from 1 hour to 12 hours. -
Page 6: Using The Remote
0%+100% sensitivity power surface material. Please see package contents before installation. *After 1 minute of being ON a BLUE light will start to flash slowly. This signal means the REDA SOLAR is in a charge state, the solar panel is connected and operated as it should.