Fakir prestige HL 300 Instructions For Use Manual page 44

Fault
Device does not
heat.
Fan is not running.
Appliance heats up
slightly.
Overheating.
20
Troubleshooting
Possible cause
Plug is not plugged.
Device is not turned on.
The socket does not have
electricity.
Temperature is set too low.
No heat setting selected.
Temperature is set too low.
Heating only at level I.
Device is defective.
Solution
Connector plug.
Switch on the unit with
heating stages.
Try a different outlet.
Higher temperature.
Turn heat setting.
Raise the temperature.
ECO function active?
Heater switch to heating
II or III
Switch off the mains plug.
Report and remove errors
in service hotline.