Advertisement
Advertisement
Table of Contents
Related Manuals for Joy-it JDS6600
Summary of Contents for Joy-it JDS6600
- Page 1 JDS6600 Dual-Channel Signal Generator...
-
Page 2: Table Of Contents
JDS6600 TABLE OF CONTENTS Introduction Device Overview Shortcut Overview Parameter settings in the main interface Measuring and counting functions Modulation mode System settings Other Informations Support Published: 06.12.2018 Copyright by Joy-IT... -
Page 3: Introduction
JDS6600 INTRODUCTION Dear customer, Thank you very much for choosing our product. In the following we have listed what you have to consider during commissioning. DEVICE OVERVIEW Published: 06.12.2018 Copyright by Joy-IT... - Page 4 JDS6600 Published: 06.12.2018 Copyright by Joy-IT...
-
Page 5: Shortcut Overview
Used in other menus for control and confirmation (On/Off). Moving the cursor position Press and hold to select channel 1 as the main display. Press and hold to select channel 2 as the main display. Published: 06.12.2018 Copyright by Joy-IT... -
Page 6: Parameter Settings In The Main Interface
Then use the direction keys to move the cursor to the value you want to edit. Then press the Main button to edit the respective value. Then press and hold the Frequency button to change the unit (MHz, KHz, Hz, MHz). Published: 06.12.2018 Copyright by Joy-IT... -
Page 7: Measuring And Counting Functions
Measurement parameters: Frequency, period, positive pulse width, negative pulse width, duty cycle. After you have set all parameters, you can use the key to start the counting function. Use the key to stop the function. Published: 06.12.2018 Copyright by Joy-IT... -
Page 8: Modulation Mode
Within the burst function (channel CH1), press the buttons to select the pulse number and burst mode. Use the direction keys to set the respective parameters. After you have made all the settings, you can use the button to start the corresponding function. Press to exit. Published: 06.12.2018 Copyright by Joy-IT... -
Page 9: System Settings
Then use the button to select or the button to cancel the operation. Setting the arbitrary wave display: The number of waveforms in the main interface can be quickly adjusted by turning the knob (1-60). Published: 06.12.2018 Copyright by Joy-IT... -
Page 10: Other Informations
Possibility of return in your area: We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by e-mail at Service@joy-it.net or by telephone. Information on packaging: If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging. -
Page 11: Support
We are also there for you after the purchase. If you still have questions or problems, we are also available by e-mail, telephone and ticket support system. E-Mail: service@joy-it.net Ticket-System: http://support.joy-it.net Phone: +49 (0)2845 98469 – 66 (9:30 - 17:00 o‘clock) For further information please visit our website: www.joy-it.net Published: 06.12.2018 Copyright by Joy-IT...
Need help?
Do you have a question about the JDS6600 and is the answer not in the manual?
Questions and answers