Advertisement
Advertisement
Table of Contents
Related Manuals for Joy-it JDS6600
Summary of Contents for Joy-it JDS6600
- Page 1 JDS6600 Dual-Channel Signal Generator 1. GENERAL INFORMATION Dear customer, thank you for purchasing our product. In the following, we have listed what you should consider during commissioning. Should you encounter any unexpected problems during use, please do not hesitate to contact us.
-
Page 2: Device Overview
2. DEVICE OVERVIEW function rotary switch 2,4“ TFT LCD keys short cuts Output on- / off switch Input TTL-interface for DC 5 V PC-connection USB-interface for PC-connection status of output waveform channel display CH1 parameter menu bar CH2 parameter difference of phase between CH1 and CH2... -
Page 3: Shortcut-Overview
3. SHORTCUT-OVERVIEW Configuration of wave form WAVE MEAS Configuration of measuring mode Activation of the modulation mode System settings Control of the output from CH1 and CH2 - It is used in other menus as control and confirmation (on / off) Moving the position of the cursor Selection of channel 1 - Hold down to set channel 1 as the main channel... -
Page 4: Modulation Mode
5. MEASURING AND COUNTING FUNCTION FUNC MEAS Press the button and after that the multifunctional button in the measuring mode to switch between the measuring function and the counting function. It can be measured the input frequency, period, positive pulse width, duty cycle and other parameters. -
Page 5: System Configuration
Pulse function: With this option, it is possible to configure the pulse wave width and the pulse time. Press the multifunctional buttons within the pulse function to select the pulse width, period, offset and amplitude. As soon as a parameter is highlighted, you can adjust it with the arrow keys. The pulse width and time can be set using the rotary button. -
Page 6: Pc Software Installation
The amount of wave forms in the main interface can be adjusted via the rotary button (1 - 60) very quickly. 8. PC SOFTWARE INSTALLATION You can download the latest version of the PC software on our Website. Start the installationby opening the file JDS6600.exe. Press Next >> in the now opening window. - Page 7 Next, enter the installation path and confirm with Next >>. The selection of the modules to be installed must also be confirmed with Next >>.
- Page 8 If you do not want the automatic search for updates enabled, you can now disable it by unchecking the option. Then continue with Next >> again. The system quick start introduced in Windows 8 occasionally causes problems in connection with the installation and removal of new hardware and should therefore be disabled.
-
Page 9: Using The Software
You can connect the signal generator to your computer either with a USB cable or with a USB-TTL cable. Now start the JDS6600 software. Here you can first select the port where you have connected the signal generator to your computer. If you are not sure which COM port you have connected your signal generator to, open the Device Manager and check the connection in the Connections tab (COM &... - Page 10 At Extend Function you will find the measuring, counting, burst, sweep and pulse functions. In Abitrary, you can create various custom waveforms and store up to 15 on the device.
-
Page 11: Further Information
We send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, you must contact us via e-mail at service@joy-it.net or via telephone. Information about packaging: Please package your old appliance safe during transport. Should you not have a suitable packaging material or you do not want to use your own material, you can contact us and we will send you an appropriate package.
Need help?
Do you have a question about the JDS6600 and is the answer not in the manual?
Questions and answers