Initial Operation; Placement - Philips Screeneo U3 User Manual

Home projector
Table of Contents

Advertisement

3 Initial operation

Placement

CAUTION!
Remove the protection foil from the
lens before operating!
Do not place any objects on top of the
lens!
Before installing the projector, make
sure the projector is disconnected from
the power supply!
1
Place the projector on a stable flat surface
in front of the projection screen.
2
Turn the rear panel of the projector toward
the projection screen.
3
Check that the placement of the projector
is appropriate to the projection surface.
The minimum and maximum projection
distance is 10 cm and 42 cm.
The distance (a) between the projector
and the projection surface determines the
diagonal screen size (b). See the figure below.
a
To change screen size, just move the
projector toward or away from the
projection surface.
Note the relationship between screen sizes
(diagonal sizes) and projection distances.
Screen size
50"
120"
8
Projection distance
10.8 cm
42 cm
Other placement
The most common way of placing the projector
is to place it on a surface in front of the
projection screen (see Placement, page 8).
You can also place the projector in the following
three ways.
Front ceiling: Mount the projector on ceiling
with upside down in front of the projection
screen. A projector mount is required to
mount the projector on ceiling.
Rear table: Place the projector on a surface
behind the projection screen. A special rear
projection screen is required.
Rear ceiling: Mount the projector on ceiling
with upside down behind the projection
screen. To mount the projector on ceiling
behind the screen, a projector mount and a
special rear projection screen is required.
After a particular placement is made, adjust
projection to the correction position ( press
, and go to System - Projection
Mode).
Notice
For overhead mounting on ceiling,
purchase a projector mount
recommended by an installation
professional and follow the instructions
that come with the mount.
Before mounting on the ceiling, make
sure the ceiling can support the weight
of the projector and mounting kit.
For ceiling installation, the projector
must be securely attached to the ceiling
in accordance with the installation
instructions. An improper ceiling
installation may result in accident, injury
or damage.
Philips · Screeneo U3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdp3550

Table of Contents