Setting The Clock - Sylvania SRCD3830 Instruction Manual

SETTING THE CLOCK

1.) Switch the unit to Standby mode by pressing the POWER button.
2.) Press and hold the MEMORY/CLOCK button on the remote. " "24 H" " (24 Hour
format) will flash in the display. Press the
(12 Hour format).
3.) Press the MEMORY/CLOCK button on the remote. The hour digits will flash.
Press the
changed automatically according to the hour setting.
4.) Press the MEMORY/CLOCK button on the remote again. The Hour is now
set and the Minute digits will start to flash in the display.
5.) Press the
6.) Press the MEMORY/CLOCK button on the remote again. The Minutes are
now set and the clock will start counting.
NOTE:
•
Clock time is only retained while the unit is plugged into the AC outlet. In
the event of a power failure,the clock will need to be reset when the power
resumes.
•
Clock time is only shown when unit is in Standby mode.
or buttons to set the hour. The AM/PM indication will be
or buttons to set the minutes.
button to select " "12 H""
or
8