Sylvania SRCD302 Instruction Manual

REPEAT PLAY - SINGLE SONG
To repeat the SAME song over and over again, do the following:
1. Select the song you want to repeat, press the Repeat Button once.
2. The repeat lamp will flashing. Then press PLAY/PAUSE button to start.
3. To stop the repeat function, press Repeat Button twice.
REPEAT PLAY - ALL SONGS
To repeat ALL SONGS on a disc, do the
1. Press Repeat Button twice during playback. The repeat lamp will be steady on.
2. All the songs on the CD will play in order and
function, press Repeat Button once.

PROGRAMMED PLAY

Up to 20 tracks can be programmed for disc play in the order you like.
1. Press Program Button when CD has stopped.
2. Press the Search/Skip Buttons either
Display.
3. Press the Program Button to store the first track.
4. Repeat steps 2 and 3 until all the desired tracks are programmed.
NOTE: Programming can only be done when the CD is in the stop mode.

SPECIFICATIONS

Radio Frequency range: AM 530~1710KHz
FM 88~108MHz
10%THD Power output
Speaker impedance:
Battery operation:
Power source: AC120V-60Hz,12Watts
following:
then start all over again. To stop the repeat
or until the desired track shows on the
1W ×2
8ohm
DC12V 8xUm2
INSTRUCTION MANUAL
PORTABLE CD RADIO PLAYER
CAUTION ！
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：
TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER,
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING： TO AVOID THE HAZARDS OF FIRE OR ELECTRICAL SHOCK；
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE．
＊ Design and specifications subject to change without notice．
SRCD302
This symbol indicates that
dangerous voltage corresponding
a risk of electric shock is
presence within this unit.
This symbol indicates that
there are important operating
！
and maintenance instructions
in the literature accompanying
this unit.