Related Manuals for Sylvania SKCR2713-AM
Summary of Contents for Sylvania SKCR2713-AM
- Page 1 MODEL NO. SKCR2713-AM UNDERCABINET MUSIC SYSTEM with BLUETOOTH INSTRUCTION MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT is a registered trademark of OSRAM SYLVANIS Inc. used under licence.
-
Page 2: Warnings And Precautions
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is Do not mix old and new batteries. intended to alert the user to the presence of uninsulated Do not mix alkaline, standard (carbon-zinc), or “dangerous voltage”... -
Page 3: Important Safety Instructions
Important Safety Instructions 1. Read Instructions - All the safety and feature. If you are unable to insert the plug receptacles as this can result in a risk of fire or operating instruction should be read before the fully into the outlet, try reversing the plug. If electric shock. -
Page 4: Preparation For Use
PREPARATION FOR USE Power Sources Main Unit: Unwind the AC power cord and extend it to its full length. Insert the AC plug of the cord into any convenient AC 120V~ 60Hz household outlet as the illustrated on right: NOTES: This unit is equipped with a polarized AC plug which has one blade wider than the other. - Page 5 Remote Control: In first time use, remove and discard the insulation film on the battery compartment as the illustrated follows: PAIR PAIR PULL PULL To replace the button cell if it is consume: 1. Push and slide out the battery tray as the illustrated below. 2.
-
Page 6: Main Unit
LOCATION OF CONTROLS Main Unit: STANDB Y Button STANDBY Indicator CD Door Open/Close Button CD Door Fast Search Forward/Skip Forward Button /PAIR (Play-Pause/BT Pair) Button 14 16 Fast Search Backward/Skip Backward 13 17 Stop Button P-MODE/CLK SET (Program-Mode/Clock set) Button DISPLAY Button LCD Display FUNCTION Button... -
Page 7: Installation
INSTALLATION Install the unit to the bottom of cabinet (if need) as follows: CAUTION: To reduce the risk of fire, never mount the unit near any heat elements such like stoves; oven … etc. -
Page 8: Operation
OPERATION GENERAL OPERATION: 1. Connected the unit to AC power as instructed earlier. The Red Indicator will illuminate. 2. Press the Button on the unit or Remote Control to power on the unit from standby mode. The Red Indicator will not light and the LCD Display will illuminate. - Page 9 4. Plays the music in the paired BT Device as usual. Notes: When the external BT Device searched the unit, our model number “SKCR2713-AM” will appear on the display of external BT Device. Pairing code “0000” or “1234” may need to enter. Normal operation after paired: 1.
- Page 10 4. Close the CD door by press the Button; the unit will start playback automatically. 5. During playback: A. Press the PAIR/ Button to pause; press again to resume normal playback. B. Press the Buttons repeatedly to skip tracks. ...
- Page 11 RADIO: FM Band: 1. In standby mode, press the Button to power on the unit. 2. Press the FUNCTION Button repeatedly until “FM XX.X MHz” appear on the display. 3. Turn the TUNING Knob to receive the desired FM station. 4.
- Page 12 ALARM SET: 1. In power off (Standby) mode. Press and hold the ALARM Button on the unit or Remote Control approximate 2 seconds until indicator "TIMER" and alarm display and the digit of hour of it is blinking. time appear on the 2.
-
Page 13: Care And Maintenance
CARE AND MAINTENANCE... -
Page 14: Troubleshooting Guide
TROUBLE SHOOTING GUIDE Symptom Possible Cause Solution Power Plug from AC Power Cord Insert the plug to wall No power had not inserted to AC outlet having wall outlet. AC 120V~, 60 Hz. Radio Station not tuned properly. Retune the radio station. -
Page 15: General Specifications
GENERAL SPECIFICATIONS: Power Source: AC 120V~, 60 Hz, 15W Clock back up: 4.5V, 3 x AAA size batteries; Not included Audio Power: 1.2 W (RMS) x 2 Impendence of Speakers: 8 Ohm; 2W Radio Band Coverage: AM 530-1710 KHz FM 88-108 MHz BT Version: BT Effective Range: 32 feet in open area... -
Page 16: Limited Product Warranty
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.com before you take any other steps as we have additional copies of instruction manuals, operating manuals and trouble shooting tips on our website which gives you the answer on most of the...