Page 1
DM650 and DM670 recorder basics Olympus Recorder Basics: Turning the Recorder on: While the recorder is turned off, slide the POWER/HOLD switch to the direction of the arrow. The POWER / HOLD switch is on the side of the recorder.
Page 2
DM650 and DM670 recorder basics CONTROLS - FOLDER and FILE SELECTION The OK button on the front of the recorder acts a little like a ‘ENTER’ key on a computer. So, if a particular ‘mode’ is selected on the HOME screen, for example ‘Recorder’...
Page 3
DM650 and DM670 recorder basics The File Display provides information about the currently selected file. For example, the file name, length, the position within the current folder (‘005/025’ refers to file 5 of 25), date and time of recording and so on.
Before making a recording, select a folder from A to E (see notes on controls and folder selection above). Once in the folder pressing the RECORD button will start a new recording. While recording, the orange LED light glows to the right of the OLYMPUS logo on the front panel. RECORD button...
Page 5
DM650 and DM670 recorder basics Press the STOP button to conclude and save the recording. Pressing OK immediately after STOP will playback the recording. STOP button button...
DM650 and DM670 recorder basics CREATING INDEX MARKS By inserting index marks in a recording you can quickly find a location you want to listen to during playback. Index marks can be created while the recorder is in recording mode or playback mode by pressing the F2 (INDEX) button.
DM650 and DM670 recorder basics ERASING FILES A selected file can be erased from a folder. Also, all files in a folder can be erased simultaneously. Select the file you want to erase (see FOLDER and FILE SELECTION above). While the recorder is not playing a recording press the ERASE button. You have 8 eight seconds at this point to select an action or the recorder returns to File Display.