Troubleshooting - Dometic Heki 2 de Luxe Installation And Operating Manual

Heki 2 deluxe
8.4 Closing the roller blind (fig. f)
NOTICE! Risk of damage due to a build-up of heat between
A
the roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of
the way. Open the glass dome into the "continuous ventilation"
position.
➤ Take hold of the recessed grip on the rod and pull it towards the rod on
the other side with the pivot until they both click into one another.
➤ Select the required position by moving the two latched-roller blinds at the
same time
8.5 Opening the roller blind (fig. g)
➤ Pull the roller blind so that the blind with the recessed grip is completely
extended.
➤ Separate the roller blinds by pressing the pivot.
➤ Guide the roller blind back using the recessed grip.
Do not let the roller blind spring back.
9

Troubleshooting

Fault
The roof light does not
close completely.
The flyscreen or
blackout roller blind
cannot be moved.
The lighting does not
work.
If you are unable to rectify the fault, get in touch with a specialist workshop.
EN
Possible cause
Dirt between the glass and
frame
Dirt on the side guides
The vehicle's power supply
to the roof light is
interrupted.
One or more lamps are
faulty.
Troubleshooting
Suggested remedy
Clean the window.
Remove any leaves and twigs
between the glass and frame.
Clean the side guides.
Check the power supply from the
vehicle to the roof light.
Replace the lamps (12 V, 5 W).
21