Installing The Heki 2 De Luxe - Dometic Heki 2 de Luxe Installation And Operating Manual

Heki 2 deluxe
7

Installing the Heki 2 de Luxe

WARNING! Beware of injury
!
Disconnect the vehicle power supply before you begin and make
sure it cannot be restarted.
NOTICE!
A
Make sure that you do not damage any cables during installation.
See fig. 4
If you would like to connect the lighting:
➤ Lay the power supply line (1) in the middle on one of the two long sides.
The connection is designed for an insulated flat plug which is 4.8 mm
wide and 0.8 mm thick.
The scope of delivery includes a mounting frame, which is suitable for roof
thicknesses of 25 – 32 mm. For roof thicknesses of 33 – 60 mm, you need to
have a suitable mounting set (see table).
➤ Measure your roof thickness W.
➤ Choose a suitable mounting set:
Roof thickness
25 – 32 mm
33 – 39 mm
39 – 46 mm
46 – 53 mm
53 – 60 mm
See fig. 5
➤ Check that the roof light has sufficient space around it (approx. 1 to 2 mm)
in the roof opening.
See fig. 6
➤ Clean the roof opening in the mounting area.
EN
Mounting
bracket colour
Grey
Black
Yellow
Blue
Red
Installing the Heki 2 de Luxe
Screws
∅ 4 x 25 mm
∅ 4 x 32 mm
∅ 4 x 40 mm
∅ 4 x 46 mm
∅ 4 x 52 mm
Item no.
Included in the
scope of delivery
9104100245
9104100246
9104100247
9104100248
17