Care And Cleaning; Troubleshooting - Black & Decker Spacemaker CG700 Use And Care Book Manual

Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
1. Remove the bowl from the mounted unit by twisting to the UNLOCK
2. Carefully remove the blade from the bowl.
Important: Blades are sharp. Handle carefully.
3. The coffee grinding bowl, mini food processor workbowl and stainless steel
chopping and grinding blades can be washed in hot, soapy water.
4. lways rinse and dry parts thoroughly after cleaning
Important: lthough these parts can be washed in the dishwasher, we recommend
they be washed by hand to preserve the sharpness of the blades and the appearance
of the workbowl. Do not immerse the appliance in water.
5. Wipe outside of appliance with a damp cloth; dry thoroughly.
8

TROUBLESHOOTING

PROBLEM
position.
Grinder stops
working.
Coffee tastes
rancid.
Coffee tastes like
nuts or spices.
ppliance will
not start.
Food is unevenly
chopped.
POSSIBLE C USE SOLUTION
The ground coffee bowl Make sure the grinding bowl
has disengaged. is correctly inserted into
There are too many beans the motor housing. Unplug
in the grinding bowl. the appliance and remove
some of the beans from the
grinding bowl.
Grinder has buildup of Oil in the coffee beans
coffee grounds. will become rancid if left
in the grinder. Makes sure
there are no beans left in
the grinding bowl. Clean
the grinding bowl after
each use.
Grinder has been used for Grinder will share flavors;
other grinding operations. purchase an additional
grinding bowl for spices
and nuts.
Workbowl or grinding bowl Be sure the arrow on the
is not correctly engaged in bowl is correctly aligned
the housing. with the LOCK
ppliance may not be on the housing and the
plugged in. bowl is completely
The outlet is not working. and flush with the base.
Check to make sure
appliance is plugged in
and outlet is working.
Workbowl is over filled. Unplug the appliance and
Food may be cut in remove some of the food
random sizes. from the workbowl.
Smaller amounts
will process more evenly.
Press the ON/OFF button
in 5 second or fewer
increments. llow
the blades to stop
completely before pressing
the ON/OFF button again.
Check the size of the food
before continuing. Cut
food in same size pieces
before placing in
processor.
symbol
9