iHome iBTW281 Manual page 6

SNOOZE/DIMMER
Snooze: When the alarm is sounding, press the Dimmer/ZZZ
Button to snooze the alarm for 9 minutes.
Dimmer: Press the Dimmer/ZZZ Button (when alarm is NOT sounding) to
adjust the display brightness.
PROGRAMMABLE SNOOZE + DIMMER
Adjust the snooze duration and set a schedule for your clock backlight
to automatically dim and brighten at certain times of the day.
1. Press and hold the Dimmer/ZZZ Button.
2. Use the + or - Buttons to adjust the snooze duration from 1-29 minutes.
Press the Dimmer/ZZZ Button again to confirm.
Now it's time to set the display dimmer schedule:
3. Default is set to OFF. Toggle to ON by pressing the + Button and then
the ZZZ Button to confirm. (Note: Choosing OFF will simply exit the
setting.)
4. Now choose the brightness level for daytime hours using the +/-
Buttons. Press ZZZ again to confirm.
5. Now set the time you want the daytime dimmer to take effect. Use the
+/- Buttons and press ZZZ again to confirm.
6. Now choose the brightness level for nighttime hours. Use the +/-
Buttons and press ZZZ again to confirm.
7. Finally, set the time you want the nighttime dimmer to take effect. Use
the +/- Buttons and press ZZZ again to confirm.
8. Done! The
active.
icon will appear on the display when Dimmer Schedule is
5