Safety Functions - Klarstein VariCook Domino Manual

EN
50
When cooking timer expires, the corresponding
5
cooking zone will be switch off automatically.
Notes on Using the Timer
• The default setting of minute reminder and timer is 30 minutes.
• After adjusting, the setting in timer indicator will flash for 5 seconds and then stop
flashing, then the setting will be confirmed.
• The minute reminder and timer can be used at the same time. The timer indicator
shows the lowest time setting. If the lowest setting is minute minder, the red dot next
to the timer indicator will flash. If the lowest setting is timer setting, the red dot of
corresponding cooking zone power level indicator will flash.
•
When the timer display shows the time of the timer with cooking zone selection, you
can display the time of the minute minder by touching the timer button

SAFETY FUNCTIONS

Automatic Detection of Pan and Small Articles (Induction Hobs)
For an induction hob, if the indicator
mean:
• You have not placed a pan on the correct cooking zone.
• The pan you are using is not suitable for induction cooking.
• The pan is too small or not properly centered on the cooking zone.
Notes on automatic pan detection:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2. No heating takes place unless there is a suitable pan on the cooking zone.
3. When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other small
item (e.g. knife, fork, key) has been left on the hob, the corresponding cooking
zone will automatically turn off in 1 minute.
Residual Heat Warning
• This function is mainly used to warn of hot surfaces:
When the hob has been operating for some time, there
will be some residual heat. The letter "H"appears in power
setting indicator to warn you to keep away from it.
• The function can also be used as an energy saving function:
If you want to heat further pans, use the hotplate that is still hot.
flashes alternately with heat setting; this may
.