Locking; Opening With Override Key - Aluminium Control Unit - Kaba Mauer Code-Combi B Operational Instructions

4.6.2 Locking

1) Turn key counter clockwise until stop position reached
2) Remove key and keep in a safe place
3) Dismantle cover plate with tool (see 4.6.1 1) - 4))
4) Insert drive shaft with the drilled hole fi rst
Put on bar handle (taking into consideration the original position
5)
of the handle)
6) Replace cover plate and click on all four catches
Cancel alarm (can only be done by primary code holder (in parallel
7)
mode) or by the dual code holder (in ordinary dual code mode)):
7a) Press ON
7b) Press P
7c) Enter valid 6-digit primary code
7d) Press P
7e) Press 9
4.7 Opening with override key – aluminium control unit
If, for example no code is available, the lock can be opened by means of the override key.
To expose the keyhole, the bar handle has to be removed (see diagram 5).
Figure 1:
Allen key
Diagram 5: Dismantling the bar handle, horizontal mounting
Kaba Mauer GmbH
Figure 2:
drive shaft
bar handle
82132 Code-Combi B
1 x
Figure 3:
shaft mounting
GB
/
/
/
/
/
/
Page 37