Storage; Cleaning - Profi Cook PC-WKS 1167 G Instruction Manual

2. Take the cover and lift it up by using the knob.
3. Then fill in the water (max. 1.5 litre). You can read the
filling level on the water level indicator of the kettle.
4. Place the cover back on. It must audibly engage.
5. Place the kettle flush on the base.
Operation
Select a temperature using the buttons 8 to 11. The lamp
starts flashing and the appliance will turn on.
NOTE:
• When the temperature is reached, you will hear a
beep.
• The lamp on the temperature button lights up. The
appliance will now keep the temperature stable for
2 hours and then switch off.
• The keep warm function remains active even if you
remove the jug from the base for a maximum of
3 minutes.
• Not for 100 °C! The keep warm function cannot be
combined with this temperature. When selecting the
"100°C" button the automatic re-boiling function (3 min-
utes) will then be activated.
Quick start:
• Press the button after putting the jug on to boil.
• The water will be heated to 100 °C.
Tea Strainer
NOTE:
The tea strainer should only be immersed in water if the
desired temperature has been reached.
1. Bring 1.0 litres (max.) of water to the boil. To prepare tea,
refer to the "TeaMax" mark. After boiling water you may
insert the tea strainer into the lid of the kettle. See the
illustration.
WARNING: Risk of burns!
• Be aware of escaping steam when removing the
cover.
• The hosing becomes hot during operation, do not
touch it.
WARNING:
• Always turn the appliance off before cleaning it and remove the
mains plug. Wait until the appliance has cooled down.
• Never immerse the appliance or the base in water or other liquids.
This may result in electric shock or fire.
44
PC-WKS1167G_IM
2. Remove the cover.
3. Dose your tea and insert the tea strainer into the lid.
4. Put the cover back on the lid until it audibly snaps into
place.
WARNING: Risk of burns!
The tea strainer becomes hot! Be careful when removing.
If necessary, use a potholder. The tea strainer will con-
tinue to drip!
Ending / Terminating Operation
There are two options to interrupt the boiling process or to
terminate it:
• The appliance will switch off after the boiling process.
• You can press the
boiling process.
The appliance switches to standby mode.
CAUTION:
Always shut off the appliance before removing it from the
base! Also ensure that it is turned off when you set it back
onto the base!
WARNING: Risk of burns!
• When pouring the water out, keep the lid closed.
• During operation the housing becomes hot. Do not
touch it and allow the appliance to cool down before
storing it away.
• Remove the mains plug.
• Emptying the water container.
• Clean the appliance as described and allow it to dry.
• We recommend that you keep the appliance in the origi-
nal packaging if it will not be used for long periods.
• Always store the appliance out of the reach of children in
a dry, well ventilated place.
Mains Cable Take-Up Appliance
The mains cable can be wound up on the base.

Cleaning

button again in order to end the

Storage

08.11.18