Information On The App "Smart Life - Smart Living; Operation - Profi Cook PC-WKS 1167 G Instruction Manual

Electrical Connection
1. Check whether the mains voltage that you want to use,
corresponds with that of the appliance. You will find the
information about it on the rating plate.
Function Buttons and Indicator Lamps
In addition to the indicator lamps, the respective function is indicated via beeps. Please refer to the following table for the
associated function.
Button Indicator Lamp
45°C
Flashes quickly
45°C
Flashes slowly
60°C
85°C
100°C
Lights up
Flashes slowly
Lights up
Change from dark
to light, to dark, etc.
Flashes slowly
Lights up
Preparation
Before using for the first time, boil fresh water at least three
times in the appliance. Use only water without any additives
or ingredients.
Information on the App
"Smart Life - Smart Living"
The Smart Life - Smart Living App is available for android
and iOS. Scan the corresponding QR code to get directly to
the download.
NOTE:
Depending on the provider, there may be costs involved in
downloading the app.
Google Play
Information on How to Use the App
This appliance allows you to operate the appliance via your
home network. A prerequisite is a permanent Wi-Fi con-
nection to your router and the free app "Smart Life - Smart
Living".
PC-WKS1167G_IM
2. Only connect the appliance to a properly installed safety
Number of Beeps / Function
1 × Press and hold the button for about 5 seconds to connect to the app.
(See chapter

Information on the App "Smart Life - Smart Living".)

1 × The temperature is selected and the heating process starts.
2 × The selected temperature is lower than the temperature of the water in the
appliance. The heating process will not start. Important! Before select a different
temperature, you need to press the respective button again. The indicator lamp
goes out again and the appliance will enter standby mode.
1 × The selected temperature has been reached.
1 × Quick Start function. The water is heated to 100 °C.
The water is heated to the selected temperature.
The appliance is in standby mode.
1 × The water is heated to 70 °C and then will remain at this temperature for 2 hours.
You will be able to change the preset temperature via the app.
1 × The selected temperature has been reached.
We recommend disconnecting the appliance from the
power supply when you are away from home to prevent
unintentional switching on while you are on the road!
System Requirement for Use of the App
• iOs 8.0 or higher
• Android 4.1 or higher
Commissioning via the App
1. Install the "Smart Life - Smart Living" app. Create a user
2. Activate the Wi-Fi function in the settings of your appli-
3. Place the appliance at a distance of about 5 meters to
4. Press and hold the 45°C button for about 5 seconds.
5. Launch the app and select " + ".
6. Select the "Water kettle" menu and follow the instructions
7. Once the appliance has been connected successfully,
App Store
Always use fresh, cold water.
1. Place the appliance on a flat surface.
socket.
account.
ance.
your router.
The indicator lamp flashes quickly.
on the display.
the indicator light of the button goes out. Now you can
operate the appliance using the app.

Operation

NOTE:
43
08.11.18