TECMIX TM HS 1250 Operating Instructions Manual page 10

Replace Grinding Pad
Insert the hex wrench into the hexagonal screw bolt on the grinding block.
•
Hold the grinding pad firmly, and then turn the wrench to dismount the pad.
•
• Installation of new grinding pad by tightening the bolt. (7)
Installing the Velcrodiscs
• The holes of the sanding discs must be congruent with the holes on the sanding pad(10).
The liability is carried by the Velcro.
Removal of dust and abrasive material
• There are internal extraction (8) and external extraction (9) for dust particles. The 8-hole
internal extraction system collects fine dust particles, enabling to adhere to wall and ceiling,
obtaining perfect effect of extracting dust.
7
10
10
8
9