Af 50 - Hella AF 80 K Technical Documentation Manual

Gear Blind OS 58/56
Crank Handle Operated Exterior Venetian Blind - 50 mm
Type: AF 50 K
AF 50- K view: Crank handle operated exterior venetian blind
1) Top rail 58 x 56 mm made of gal-
vanised sheet steel (cutting edges
without surface treatment)
2) Plastic blind-bearing
3) Crank handle gear
4) Bearing
5) Crank rod with folding handle and
plastic or magnetic holder
6) Slat 50 x 0.24 mm
7) Bottom rail 50 x 18.6 mm made of
aluminium, extruded and powder-
coated
8) Plastic end cap for bottom rail
9) Ladder cord for 50 mm slats
10) Lifting tape 6.0 x 0.28 mm
11) Lateral tensioning
12) Wire bracket or tensioning shoe
with clamping screw
Subject to technical modifi cations - Date 06/2006
Field of Application and
Use
Exterior venetian blind
with low-noise wind pro-
tection device, suitable for
large door and window
openings up to a surface
area of 20 m².
Benefi ts of the Product
- Sun protection
- Anti-glare blind
- Light regulation
- View protection
- Design of the facade
- Long durability due to
top quality components
Operation
Raising and lowering the
blind and tilting of the
slats via crank handle and
smooth-running bevel
gear unit. Seen from the
inside, the blind can be
operated from the right or
left side depending on the
customer's preference.
Installation
According to require-
ments, the blind can be
installed outside on the
window frame or door-
frame, in a shaft provided
by customers or in front
of the window recess (see
installation location and
dimensioning instruc-
tions).
1