Hella Outdoor Blinds Installation Instructions And Instructions For Use

Installation Instructions and Instructions for Use
These instructions must be read
before installation
Outdoor Blinds / Exterior Venetian Blinds
Operating Guidelines
Installation instructions
Installation Instructions and Instructions for Use
Preliminary remarks HELLA
Outdoor Blinds / Exterior Venetian Blinds
(Also valid for units with Blitzraffer system and for units in the wind-resistant design.)
With this HELLA product you have opted for a high-quality product with a most up-to-date
technology that can nevertheless be easily installed and operated. In these instructions we
describe the basic installation, commissioning and use.
For authorized specialist staff
For the consumer (user)
The following notes and tips for outdoor blinds are also valid for exterior Venetian blinds.
The following symbols will assist you with the installation or use and require a safety-
conscious conduct:
Attention!
This symbol indicates instructions that, if disregarded, can put the user in
danger.
Attention!
This symbol indicates instructions that, if disregarded, can potentially result
in damage to the product.
This symbol indicates instructions for use or helpful information.
This symbol requires you to act.
Attention!
This symbol indicates a risk of injury or danger to life due to an electric
shock.
This symbol indicates parts of the product, for which you will find important
information in these installation instructions.
Subject to technical modifications - Date of Issue May/2014
and use!
Installation Instructions and Instructions for Use

Table of Contents

Preliminary remarks HELLA Outdoor Blinds / Exterior Venetian Blinds................................ 1
General notes ....................................................................................................................... 2
CE identification ................................................................................................................... 3
Safety instructions ................................................................................................................ 4
Designated use .................................................................................................................... 9
Servicing, maintenance and repair ..................................................................................... 11
Operating guidelines........................................................................................................... 13
Before installation ............................................................................................................... 15
Overview: Tools for the installation ..................................................................................... 16
Overview: Outdoor Blind / Exterior Venetian Blind ............................................................. 17
Minimum recess depths ...................................................................................................... 19
Installation of brackets ........................................................................................................ 21
Installation of the blind ........................................................................................................ 23
Preparing the duct for the crank handle.............................................................................. 24
Installation of the Crank Handle ......................................................................................... 25
Fixing the Hirschmann power connector to the top rail ....................................................... 26
Installation of the wire tensioning ....................................................................................... 27
Installation of the stable wire tensioning ............................................................................. 30
Installation of the guide rails ............................................................................................... 31
Installation of the guide rail insert ....................................................................................... 47
Installation of a linked unit .................................................................................................. 48
Self-supporting installation - FT1 and FT2 ......................................................................... 49
Adjustment package heights .............................................................................................. 51
Fixing material .................................................................................................................... 52
Installation on thermal insulation composite system (WDVS) ............................................. 54
Installation to post-and-beam facade.................................................................................. 58
Activation guidelines for electric drives ............................................................................... 59
Activation guidelines for venetian blind motors ................................................................... 60
Electrical connection........................................................................................................... 61
Connection directives for motor drive ................................................................................. 62
General Design option: Tilting both ways ........................................................................... 64
General Design option 90° tilting ........................................................................................ 65
General Design option with working position ...................................................................... 66
General Design option: Daylight transport function ............................................................ 68
General Design option: Light control function ..................................................................... 69
Commissioning / functional check ...................................................................................... 70
Outdoor blind with ECN system .......................................................................................... 71
Levelling out an inclined position of the bottom rail ............................................................ 72
Removal ............................................................................................................................. 73
Handing over report (for the fitter) ...................................................................................... 74
Handing over report (for the user) ...................................................................................... 75
Installation Instructions and Instructions for Use
General notes
Questions
In case of questions concerning the installation or the use of your product, please consult
your authorized specialist shop.
Spare parts / repairs
Spare parts are available at your HELLA specialist shop. Only spare parts that are ap-
proved by HELLA are allowed to be used.
Liability
In case of non-observance of the directions and information given in these instructions and
in case of improper operation or unintended use, the manufacturer shall not accept any
warranty claims concerning any damage to the product. In these cases the liability for
consequential damage to any parts or persons is ruled out as well.
Legal notes
The graphs and texts of these instructions were carefully prepared. We cannot be held
liable for any errors and their potential consequences! Subject to technical modifications to
the product and to these instructions! These instructions include copyrighted information.
All rights reserved! The listed product or brand names are trademarks of the respective
owners.
1 2 Subject to technical modifications - Date of Issue May/2014