Mitsubishi i-MiEV Emergency Response Manual page 30

(4) Towing by tow rope (for emergency situations only)
WARNING:
Towing the vehicle with the rear wheels on the ground may cause vehicle fire due to short circuit by
the electricity generated from the electric motor (electric motor unit).
If there is no other alternative, and you must tow the vehicle using a tow rope, the vehicle speed
must not exceed 18 mph (30 km/h) and the towing distance must be minimized.
While towing, set the selector lever to "N (Neutral)" position.
1) Towing procedure.
① Set the tow rope on the towing hook (A) of the body.
② Turn the Electric Motor Switch (Ignition switch) to the "ACC" position.
③ Set the selector lever to "N (Neutral)" position.
④ Turn on the hazard lamps to provide warning to other vehicles.
CAUTION:
When the electric motor unit is stopped, brake efficiency is reduced and steering effort increases.
If the Electric Motor Switch (Ignition switch) is in the "LOCK" position, it is impossible to use steering
due to steering lock function and it could cause an accident.
Ensure there is proper tension in the tow rope at all times during towing to avoid breakage of the tow
rope or the towing hook and to avoid injury to bystanders or vehicle damage.
If you find an abnormal noise, smell and/or strong vibration from the vehicle while towing, stop
towing and carry out the following procedures:
① Stop the vehicle as soon as possible in a safe location.
② Set the selector lever to "P (Parking)" position and apply the parking brake.
③ Turn the Electric Motor Switch (Ignition switch) to the "LOCK" position.
④ Wait at least one minute, then disconnect the 12V battery negative terminal. Then wait 5
minutes.
⑤ Wearing Personal Protective Equipment (PPE), unplug the Service Plug. Refer to page 12
and 10 for details.
⑥ Transport the vehicle using a tow truck.
27