Unit Description; Preparing The Measurement - Beurer BC 40 Instructions For Use Manual

The use of accessories other than those specified or pro-
vided by the manufacturer of this device can lead to an
increase in electromagnetic emissions or a decrease in
the device's electromagnetic immunity; this can result in
faulty operation.
Failure to comply with the above can impair the perfor-
mance of the device.

3. Unit description

1. Display
2. Battery compartment lid
3. Wrist cuff
4. START/STOP button
5. Memory button M
1
5 4
Information on the display:
1. Systolic pressure
2. Diastolic pressure
3. Risk indicator
4. Time and date
5. Calculated pulse value
6. Cardiac arrhythmia sym-
bol
2
7. Pulse symbol
8. Battery replacement sym-
bol
9. Memory space number/
memory display average
value ( A ), morning ( AM ), evening ( PM )
10. Release air (arrow)

4. Preparing the measurement

3
Insert the batteries
Remove the battery compartment lid on the right side of
the device.
Insert two 1.5 V micro (alkaline type LR03) batteries. Make
sure that the batteries are inserted the correct way round.
Do not use rechargeable batteries.
Close the battery compartment lid again carefully.
22
10
9
8
7 6 5
1
2
3
4