Table of Contents
Advertisement
Quick Links
Expansion DIO Card for FRENIC-VG
Thank you for purchasing our expansion DIO card designed for the high-performance, vector control FRENIC-VG
series of inverters.
- Improper handling might result in incorrect operation, a short life, or even a failure of this product.
- Deliver this manual to the end user of this product. Keep this manual in a safe place until this product is
discarded.
- This manual does not contain the description of function codes or troubleshooting information. Read through
this manual in conjunction with the FRENIC-VG User's Manual.
Fuji Electric Co., Ltd.
OPC-VG1-DIO
- 1 -
Instruction Manual
INR-SI47-1604JE
Advertisement
Table of Contents
Related Manuals for Fuji Electric OPC-VG1-DIO
Summary of Contents for Fuji Electric OPC-VG1-DIO
- Page 1 - Deliver this manual to the end user of this product. Keep this manual in a safe place until this product is discarded. - This manual does not contain the description of function codes or troubleshooting information. Read through this manual in conjunction with the FRENIC-VG User's Manual. Fuji Electric Co., Ltd. INR-SI47-1604JE - 1 -...
- Page 2 Keep this manual in a safe place. Related Publications Listed below are the other materials related to the use of the expansion DIO card "OPC-VG1-DIO." Read them in conjunction with this manual as necessary. • FRENIC-VG User's Manual •...
- Page 3 • Prevent lint, paper fibers, sawdust, dust, metallic chips, or other foreign materials from getting into the inverter and the interface card. Otherwise, a fire or an accident might result. • Incorrect handling in installation/removal jobs could cause a failure. A failure might result.
- Page 4 Unpack the package and check the following. (1) The product is the type you ordered. You can check the model printed on the interface card Model: OPC-VG1-DIO (2) The interface card is not damaged during transportation. (3) The following accessories are also contained in the package.
- Page 5 1.3 Precautions for Use 1.3.1 Temporary storage Table 1.3-1 Storage and Transport Environments Item Specifications Storage temperature -25 to +70˚C Places not subjected to abrupt temperature changes or condensation (Note 1) or freezing. Relative humidity 5 to 95% (Note 2) The interface card must not be exposed to dust, direct sunlight, corrosive or flammable Atmosphere gases, oil mist, vapor, water drops or vibration.
- Page 6 Chaper 2 INSTALLING THE INTERFACE CARD 2.1 Removing the Front Cover • Incorrect handling in installation/removal jobs could result in a broken produce. • Before installing or removing the interface card, shut down the input power to the inverter and make sure that the charging lamp is turned OFF.
- Page 7 2.2 Installing the Interface Card The interface card should be connected to either one of two connectors A-port (upper side) and B-port (lower side) on the control printed circuit board (control PCB). - When using the interface card without the digital 16-bit option (e.g., OPC-VG1-UPAC), follow the "Mounting procedure 1"...
- Page 8 DIO interface card. Please feel free to send your comments regarding any errors or omissions you may have found, or any suggestions you may have for generally improving the manual. In no event will Fuji Electric Co., Ltd. be liable for any direct or indirect damages resulting from the application of the information in this manual.
Need help?
Do you have a question about the OPC-VG1-DIO and is the answer not in the manual?
Questions and answers