Advertisement
Quick Links
Eco Clean - User Guide
Fast Disc Cleaning Machine
The Eco Clean is a fast disc cleaning machine, designed to take the pain out
of cleaning fingerprints and dirt from your bundles of discs.
It is a great companion to a disc repair machine where the discs come out
with polish on, but also as a cleaning tool for discs that have simply been
handled and need a clean.
Within just a few moments you can set up your Eco Clean machine and
start cleaning discs.
If you have any questions about the operation of this machine, you can call
our Technical Support Team, Mon-Fri, 9am-5pm on Freephone:
0800 412 5424
©Total Disc Repair
|
www.totaldiscrepair.co.uk
Box contents
You will find the following items present:
•
•
•
•
•
•
•
Parts of the machine
|
Technical Support: 0800 412 5424 - support@totaldiscrepair.co.uk
Eco Clean Fast Disc Cleaner
AC/DC Power Supply (DC12V 3.3A)
Cable for the AC/DC Power Supply
Cleaning Fluid for 1000 disc cleans
Key card for 1000 disc cleans (Installed in card slot)
Cleaning Roller for 1000 discs (Installed in machine)
Priming assist foam tool
AC Power
Socket
Cleaning Fluid
Tube Connector
Cleaning
Roller
Cleaning Fluid
Spray Nozzle
|
Sales: 01202 489 500 - sales@totaldiscrepair.co.uk
Keycard Slot
Turntable
Status LED
Cleaning
Solution
Power Cable
Holder
Advertisement
Related Manuals for TDR Eco Clean
Summary of Contents for TDR Eco Clean
- Page 1 Parts of the machine Keycard Slot AC Power Socket Turntable The Eco Clean is a fast disc cleaning machine, designed to take the pain out of cleaning fingerprints and dirt from your bundles of discs. Cleaning Fluid Tube Connector Status LED...
- Page 2 2. To operate the machine just close the lid and the Eco Clean begins 2. Remove the Eco Clean machine from the protective bag and peel off cycle automatically, keep holding the lid down.
- Page 3 Installing replacement consumables Operating hints and care advice Replacing the key card: • After several cycles, some fluid may accumulate in the machine. If this happens, wipe the disc cleaning camber with a dry and soft cloth. 1. Make sure the power supply is disconnected. The key card can be removed by gently pressing down on the small tab on the top of the •...