Advertisement
Quick Links
Super Sink Single
SuperSink accurately blends proportioned chemical with water for cleaning, sanitizing or other related
needs in a commercial kitchen. The dispensing system uses a pilot drive water valve designed for
easy maintenance. SuperSink is engineered with 1055 approved back flow protect using DEMA's Air
Gap or Action Gap proportioning system.
Warnings
All installations must conform to local plumbing codes and use approved backflow prevention devices.
A pressure indicating tee is to be installed with existing faucets according to local plumbing codes in the
state of Wisconsin and any other state that requires the use of a pressure indicating tee.
ALWAYS WEAR PROTECTIVE CLOTHING AND EYEWEAR WHEN WORKING WITH CHEMICAL
PRODUCTS.
I-1279 REV. B-44805
Sink Chemical Dispensing System
Installation and Setup Guide
3/5/2019
Super Sink Dual
PAGE 1 OF 9
Advertisement
Related Manuals for DEMA Super Sink Series
Summary of Contents for DEMA Super Sink Series
- Page 1 SuperSink accurately blends proportioned chemical with water for cleaning, sanitizing or other related needs in a commercial kitchen. The dispensing system uses a pilot drive water valve designed for easy maintenance. SuperSink is engineered with 1055 approved back flow protect using DEMA’s Air Gap or Action Gap proportioning system.
- Page 2 Installation (Super Sink Single) WARNING: INSTALLATION OF DEMA PRODUCTS MUST MEET ALL APPLICABLE PLUMBING CODES AND REGULATIONS ESTABLISHED BY NATIONAL, CITY, COUNTY, PARISH, PROVINCIAL OR OTHER AGENCIES. IT IS POSSIBLE THAT PLUMBING CODES AND REGULATIONS REQUIRE THAT A CERTIFIED INSTALLATION CONTRACTOR OR ENGINEER PERFORM THE PLUMBING INSTALLATION.
- Page 3 3/8” Brass Barb Water Fitting (suitable for 3/8” LDPE tubing) b. Faucet adapter kits are often used to provide water source to the dispenser. DEMA recommend P/N 68.4 NSF which includes faucet adapters for T&S, Chicago and Fisher faucets.
- Page 4 Installation (Super Sink Dual) Pull down on bottom clip. Then swing Dual Super Sink cover up to remove from unit. #8 HI- LOW SCREWS FOR VALVE(S) REMOVAL FROM BACK PLATE (DUAL SUPER SINK ONLY) I-1279 REV. B-44805 3/5/2019 PAGE 4 OF 9...
- Page 5 Valve Plug Adapter Retainer Clips Water Connection Fitting Proportioner Elbow – Metering Tip Key Shaped Installs At This Mounting Holes Fitting By Threading The Metering Tip Into The End Of Fitting. Outlet Fitting – Slide the Outlet Tubing Over The Outlet Fitting.
-
Page 6: Replacement Parts
Replacement Parts: Super Sink Replacement Parts DEMA Part Item No. DESCRIPTION 40.886.1 ACTIVATION KNOB 40.883.1 COVER SINGLE, SUPER SINK 40.887.1 KNOB BACK PLATE 40.909.2 KNOB RETURN SPRING 40.854.1 ADAPTER RETAINING CLIP 40.926.1 FUSION VALVE PLUG ADAPTER 40.847.2 1 - 2 FUSION VALVE ASSEMBLY, LESS ADAPTER 89.20.3... - Page 7 40.892.1 FUSION VALVE COUPLING, OPEN (DUAL SUPER SINK ONLY) FUSION VALVE COUPLING, CLOSED (DUAL SUPER SINK 40.892.2 ONLY) 40.891.1 BACK PLATE, SUPER SINK DUAL 40.970.1 BUBBLE LEVEL (DUAL SUPER SINK ONLY) 100.15K TIP KIT 66.54 SCREW & ANCHOR KIT L806 CHEMICAL LABEL L1860 BRANDING LABEL (SINGLE SINK DISPENSER)
- Page 8 Replacement Parts Valve Body Valve Replacement Parts ITEM NO. DEMA PART NO. DESCRIPTION 40.854.1 RETAINING CLIP PILOT ACTIVATED VALVE 41.058.1 DIAPHRAGM CAP O-RING SEAL EPDM (15/16” X 1/16”) 619.21 98.26.1 1-1/16" DIAPHRAGM 40.824.1 VALVE BODY 40.849.1 BUTTON, PILOT ACTIVATED VALVE 640.106...
-
Page 9: Specifications
Rubber and synthetic rubber parts such as “o”-rings, diaphragms, PVC tubing, and gaskets are considered expendable and are not covered under warranty. This warranty is extended only to the original buyer of DEMA products. If products are altered or repaired without prior approval DEMA, this warranty is void.