Rinnai Storage Package Contents - Rinnai Infinity Series Installation Manual

RINNAI STORAGE PACK CONTENTS
This Rinnai Hot Water Pack should consist of the following:
Set of 3 Valves (Hot, Cold, Gas) Equal to number of heaters
1 x Hot water cylinder
Valve Pack Corresponding to the Size of Hot Water Cylinder
1 x Primary Pump
1 x Mains Valve Kit
1 x Expansion Vessel
1 x TSTAT1 (Control Thermostat)
1 x TSTAT2 (Safety Thermostat/High Limit Thermostat)
1 x Temperature and Pressure Relief Valve
1 x MC91 Controller (for diagnostics only not to be left connected to heater)
1 x Installation Manual and Service Log
Optional Extra
Water Conditioner in Hard Water Areas (recommendation in ACOP L8 2014)
6