Advertisement
ASSEMBLY / OPERATING INSTRUCTIONS
Restraints - Harness...
To secure the child in the harness, place
1
right hand buckle prong (a) into the right
buckle housing (b) until you hear a click.
Then place left hand buckle prong (c)
2
into the left buckle housing (d) until you
hear a click.
Once all attached, carefully adjust the
3
harness straps by pulling each slider until
the desired fit is achieved in the lap, and
crotch straps.
To release the buckles, squeeze the top
4
and bottom prongs (a) and (c) on either
side until harness disengages.
CAUTION: Always adjust the harness when
changing the seating position of the child.
a
b
c
d
Advertisement
