PROGRAMMING TIMER OPERATION MODE
1
Turn unit ON
(display should show
temperature and
power level).
5
To modify red (T2),
turn dial till red light
blinks. Push dial
to confirm. Or, to
modify green (T1
already flashing),
push dial to confirm.
Setting Timer Temperatures T1 and T2
2
Push dial once, then
power level will blink.
6
Display will show the
current setting for
the green or red
temperature.
3
Turn dial till clock
blinks.
7
Turn dial to the
desired temperature.
Push dial to confirm.
4
Press dial to confirm
(green light will flash).
8
Push dial to confirm.
Repeat steps 2 to 8
for temperature not
yet set (T1 or T2).
TRD50615E
5