O 2. Additional Safety Rules For Riding Floor Scrapers - Bartell Global Innovatech Terminator T-2200PRO Complete Manual

Ride-on
Table of Contents

Advertisement

2. Additional Safety Rules for Riding Floor Scrapers
CAUTION: FAILURE TO HEED THESE WARNINGS MAY RESULT IN SERIOUS
PERSONAL INJURY OR DEATH AND SERIOUS DAMAGE TO THE
TERMINATOR
®
The Terminator
is to be operated only by qualified, trained personnel.
DON'T attempt to operate the Terminator
operation of the Terminator
DON'T operate the Terminator
DON'T use the Terminator
machine.
DON'T attempt to operate on anything but the designated voltage.
DON'T wedge anything against the motor fan to hold motor shaft.
DON'T operate equipment without guards in place.
DON'T operate the Terminator
DON'T stand directly behind or in front of the Terminator
DON'T lift the hood, inspect the blade, or otherwise service or maintain the Terminator
while power is enabled.
DON'T operate the Terminator
DON'T overreach. Keep proper footing and balance at all times.
DON'T run the machine into piles of debris, as this may cause the machine to become
unstable and tip over.
DON'T sit on or stand next to, under or around the Terminator
in a moving vehicle, whether by itself or with other equipment.
DON'T attempt to use the Terminator
around on a ramp or hill.
DON'T put your hands or feet in the blade area when the Terminator
DO turn the power off when not in use.
DO use personal safety equipment such as steel toe shoes, safety glasses, gloves, and ear
plugs.
DO use gloves when changing blades and removal tools. Tools may be hot and cause
burns.
DO familiarize yourself with all safety features and controls before each use.
DO use the Terminator
®
the Terminator
will invalidate applicable warranties and possibly damage the machine.
DO reduce speed next to walls, machinery and other objects.
DO pre-survey the floor for cracks, ditches, trenches, electrical outlets or bolts, which could
catch the blade of the machine.
DO operate the Terminator
DO use the seat belt on the machine.
®
.
®
®
.
®
unless every guard, warning notice or sign is in place.
®
on roofs or floors not designed to carry the weight of the
®
near an open flame or smoking materials.
®
if the top cover is open.
®
on a non-horizontal surface or turn the Terminator
®
only for the purpose for which it was designed. Attempting to alter
®
at a safe speed.
if you are not thoroughly familiar with the
®
when power is enabled.
®
when it is being transported
OIPB-I03026-T2200PRO_v3.1
P a g e
| 8
®
®
®
is running.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents