Important Safety Instructions; O 1. Safety Instructions For All Tools; All Tool - Bartell Global Innovatech Terminator T-2200PRO Complete Manual

WARNING: When using electric tools, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and personal injury, including the
READ ALL INSTRUCTIONS
following:
1. Safety Instructions for All Tools
• KEEP GUARDS IN PLACE and in working order.
• REMOVE ADJUSTING TOOLS AND WRENCHES. Form habit of checking to see that
keys and adjusting wrenches are removed from the Terminator
• KEEP WORK AREA CLEAN. Cluttered areas invite accidents.
• KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area.
• WEAR PROPPER APPAREL. No loose clothing, gloves, neckties, rings, bracelets or
other jewelry to get caught in moving parts. Non-slip footwear is recommended. Wear
protective hair covering to contain long hair.
• ALWAYS WEAR SAFETY GLASSES. Also use a face or dust mask if operating in a
dusty environment. All users and bystanders must wear eye protection that conforms to
ANSI Z87.1. (CAN/CSA Z94.3)
• MAINTAIN EQUIPMENT WITH CARE. Keep equipment clean for best and safest
performance. Follow instructions for lubrication and changing accessories.
• DISCONNECT BATTERY before servicing.
• REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure handles are centered
and the engine throttle control is at the lowest setting.
• USE RECOMMENDED ACCESSORIES. Consult the instruction manual for
recommended accessories.
• NEVER STAND ON TOOL. Serious injury could occur if the machine is tipped or rocked.
• CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may affect its operation. A guard
or other part that is damaged should be properly repaired or replaced. Do not use tool if
switch does not turn it on and off.
• NEVER LEAVE EQUIPMENT RUNNING UNATTENDED. TURN POWER OFF. Don't
leave equipment until it comes to a complete stop.
• DO NOT OPERATE ELECTRIC TOOLS NEAR FLAMABLE LIQUIDS OR GASSES OR
EXPLOSIVE ATMOSPHERES. Motors in these tools may spark and ignite fumes.
• ALWAYS PROVIDE PROPER VENTILATION. Ventilation is required when using the
®
Terminator T2200 PRO. Positive or negative pressure ventilators must be used in any
enclosed space where the machine is to be used. Use carbon monoxide (CO) monitoring
when the machine is in-use indoors. The CO generated by propane engines can be
hazardous to your health if not proper ventilation is not provided.

3. Important Safety Instructions

P a g e
®
before turning tool on.
OIPB-I03026-T2200PRO_v3.1
| 7