3
Technical Characteristics
3.1
Walkbehind system technical specifications
WalkBehind System
Manufacturer
Power socket for
Length (mm) (for dispatch)
Width (mm)
Weight (kg)
Suitable for Baier diamond channel cutters (type)
3.2
EU Declaration of Conformity
We herewith declare, with sole responsibil-
ity, that this product conforms to the follow-
ing standards or normative documents:
in accordance with the provisions of the
2006/42/EC (Machinery Directive)
2011/65/EU (RoHS Directive)
in conjunction with the safety instructions
documented in the instruction manual and
the specified intended use.
The head of development is authorised to write the
technical documents.
These are available from:
Maschinenfabrik OTTO BAIER GmbH,
Heckenwiesen 26,
71679 Asperg
Germany
Thomas Schwab
Managing Director
Asperg, 01.04.2019
3.3
Controls
Walkbehind system
1
1
Top handle
2
Connection cable, walk-behind system
3
ON / OFF switch
4
Mains plug, diamond channel cutter
5
Clamping lever, bottom handle
6
Clamping lever, adjustable tube
EN 60745
Directives
Robert Pichl
Head of Development
BFS
Maschinenfabrik OTTO BAIER GmbH
Round pin plug
(EU - CEE 7/17)
1420
140
6,1 kg
BDN 452, BDN 453, BDN 454, BDN 455,
BDN 463 / 4, BDN 464 / 4, BDN 466 / 6, BDN 511
7
Inclined tube
8
Bracket (BDN handle fixing)
9
Switch presser
10 Diamond channel cutter (illustration example)
11 Rear roller, diamond channel cutter
12 Angle bracket, left (for mounting on BDN 511)
13 Flat bracket (for mounting on BDN 452,
BDN 453, BDN 454, BDN 455, BDN 463 / 4,
BDN 464 / 4 or BDN 466 / 6)
14 Guide indicator
15 Front roller, diamond channel cutter
16 Star knob
17 Angle bracket, right
18 LED display, diamond channel cutter
19 Adjustable tube
20 Guide
21 Connection cable, diamond channel cutter
22 Bottom handle
23 Machine socket on the walk-behind system
3.4
Intended use
The walk-behind system is intended for holding a
Baier diamond channel cutter. The walk-behind sys-
tem mounted on a Baier diamond channel cutter en-
ables large, very hard floors to be removed quickly
and easily in a comfortable working posture.
Observe the relevant regulations in your coun
try for the materials to be machined and
extraction.
NEMA 6 (USA)
| 21 |