Table of Contents
Advertisement
KNOW YOUR PRODUCT
DUST
EXTRACTOR
• 550W (3/4 HP)
INDUCTION MOTOR
• 1850W AUTOMATIC
POWER OUTLET
• 65L COLLECTION BAG
• ø100MM X 2.5M SUCTION
HOSE
INSTRUCTION MANUAL
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1214
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Full Boar FBT-6000
Summary of Contents for Full Boar FBT-6000
- Page 1 KNOW YOUR PRODUCT DUST EXTRACTOR • 550W (3/4 HP) INDUCTION MOTOR • 1850W AUTOMATIC POWER OUTLET • 65L COLLECTION BAG • ø100MM X 2.5M SUCTION HOSE INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1214...
-
Page 2: Specifications
SPECIFICATIONS - MODEL NO. FBT-6000 Input: 230-240 V ~ 50 Hz Power 550 W No load speed: 2850/min Max. power consumption of the automatic socket-outlet: 1850 W Max. total power consumption: 2400 W Protection type: IP40 Max. vacuum: 1600 Pa (677 cfm) Max. - Page 3 KNOW YOUR PRODUCT (cont.) Accessories: 18. 4 x Screws for chassis 21. 2 x Hose fastening 19. 4 x Screws for side support 22. Connection adapter 20. 8 x Nuts...
-
Page 4: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS ............Page 02 KNOW YOUR PRODUCT ........... Page 02 INTRODUCTION ............Page 05 SAFETY INSTRUCTIONS ..........Page 05 UNPACKING .............. Page 09 ASSEMBLY ..............Page 10 OPERATION ............... Page 12 MAINTENANCE ............Page 14 TROUBLE SHOOTING ..........Page 15 DESCRIPTION OF SYMBOLS ........ -
Page 5: Introduction
INTRODUCTION Congratulations on purchasing a Full Boar Dust Exctractor. Your Full Boar Dust Extractor FBT-6000 has been designed for extracting chippings and dust arising from the processing of wood or wood-type materials. SAFETY INSTRUCTIONS WArNINg! When using mains-powered equipment, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. - Page 6 GENERAL SAFETY INSTRUCTIONS WArNINg! read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “Power Tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
- Page 7 GENERAL SAFETY INSTRUCTIONS (cont.) d. remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Page 8 ADDITIONAL SAFETY RULES FOR DUST EXTRACTORS IMPOrTANT! When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place so that the information is available at all times.
-
Page 9: Unpacking
UNPACKING KNOW YOUR PRODUCT • Open the packaging and take out the equipment with care. • Remove the packaging material and any packaging and/or transportation braces (if available). • Check to see if all items are supplied. • Inspect the equipment and accessories for transport damage. • If possible, please keep the packaging until the end of the guarantee period. IMPOrTANT The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There is a danger of swallowing or suffocating! 1 x Dust bag hook (1) 1 x Dust bag (2) 2 x Quick-release device (3,5) -
Page 10: Assembly
ASSEMBLY KNOW YOUR PRODUCT WArNINg! During assembly ensure the dust extractor is switched OFF and unplugged from the power supply. 1. Undo the two nuts (E) on both sides of the extractor housing (13) (Fig. 3). 2. Guide the side panels (12) over the screws on the extractor housing (13) and secure them with the nuts (E) (Fig. - Page 11 KNOW YOUR PRODUCT ASSEMBLY (cont.) 7. Fit the dust bag (2) over the top opening in the extractor housing (13) so that it completely surrounds the opening and secure it using the quick-release device (3) (Fig. 11). 8. Pull the debris bag (6) Fig.
-
Page 12: Operation
OPERATION WArNINg! The power supply for this product should be protected by a residual current device (rated at 30mA or less). A residual current device reduces the risk of electric shock. Tools can be connected directly to the dust extractor if Fig. - Page 13 OPERATION (cont.) Emptying the debris bag WArNINg! Before emptying the debris bags ensure the dust extractor is switched OFF and unplugged from the power supply. Inspect and empty the sawdust bag (6) regularly. 1. Hold the filled sawdust bag in place with one hand. 2.
-
Page 14: Maintenance
MAINTENANCE WArNINg! Ensure the dust extractor is switched off and disconnected from the power supply before performing any maintenance or cleaning. • Keep air vents clean of dust and dirt. • We recommend that you clean the device after each time you have finished using it. • Empty dust and dirt from the debris bags regularly. • Remove dust and dirt from the dust extractor housing and motor housing regularly with a soft cloth, brush or compressed air. • If the power cord is damaged, have it replaced by an electrician or a power tool repairer. • Regularly check that all bolts, screws and nuts are securely fixed as these could work loose during normal operation. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the drill press by an unauthorised person or by mishandling of the pedestal drill. -
Page 15: Trouble Shooting
TROUBLE SHOOTING Problem Cause remedy Dust extractor does not start -Power cord not connected - Connect properly - Switch on/off switch to on -On/off switch in the incorrect (“I”) Position position Power tool does not start -Power cord not connected -Connect properly - Switch on/off switch to... -
Page 16: Description Of Symbols
DESCRIPTION OF SYMBOLS IP40 Ingress protection from water Cubic foot per minute Wear hearing protection Wear breathing protection Sound power level Read instruction manual Total power consumtion Psum Litres ø Diameter CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. -
Page 17: Contents
CONTENTS 1 x Dust bag hook 1 x Dust bag 2 x Quick-release device 1 x Debris bag 1 x Chassis 1 x Side support 1 x Suction hose 2 x Side panel 1 x Extractor housing 1 x Connection adapter 1 x Assembly fasteners 1 x Instruction manual Distributed by:...
Need help?
Do you have a question about the FBT-6000 and is the answer not in the manual?
Questions and answers