Page 1
KNOW YOUR PRODUCT & DRY VACUUM • 40L STAINLESS STEEL TANK • 1150W MOTOR • TRANSPORT TROLLEY • 3M SUCTION HOSE INSTRUCTION MANUAL WARNING: Read all safety warnings and instructions before use. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
SPECIFICATIONS - MODEL NO. FBWDV-40PTU KNOW YOUR PRODUCT (cont.) Mains voltage: 220 - 240V ~ 50Hz Input power: 1150W Power outlet max.: 1450W Psum: 2600W Suction power max.: 230 mbar Tank capacity: 40 l IP rating IP24 Weight: 11 kg KNOW YOUR PRODUCT 1.
TABLE OF CONTENTS INTRODUCTION Congratulations on purchasing a Full Boar wet and SPECIFICATIONS............Page 02 dry vac. KNOW YOUR PRODUCT........... Page 02 It has been designed for wet and dry vacuuming using the appropriate filter. The appliance is not suitable for INTRODUCTION............
Page 4
GENERAL SAFETY WARNINGS WET AND DRY VACUUM SAFETY WARNINGS SAVE THESE INSTRUCTIONS IMPORTANT! When using the equipment, a few safety precautions must be ¥ Important: Read the operating instructions before assembling and using the appliance observed to avoid injuries and damage. Please read the complete operating manual for the first time.
WET & DRY VACUUM SAFETY WARNINGS (cont.) ASSEMBLY • This appliance is not intended for use by persons (including children) with reduced WARNING! During assembly ensure the wet and dry vac is switched OFF and physical, sensory or mental capabilities, or lack of experience and knowledge, disconnected from the power supply.
Page 6
ASSEMBLY (cont.) KNOW YOUR PRODUCT KNOW YOUR PRODUCT ASSEMBLY (cont.) Fitting the motor head (12): Fitting the dust bag (26) - vacuuming dry matter: 1. The motor head (12) is fastened to the tank (8) by the Place the dust bag (26) inside the tank (8), then slip the motor securing clips (6), (fig.
SUCTION TOOLS OPERATION Floor tool (21): This vacuum must be used with a residual current device with a rated residual current of 30mA or less. The floor tool (21) is for vacuuming solids and liquids over medium to large areas (fig. 16). AUTO ON/OFF/AUTO switch (3) (fig.
OPERATION (cont.) MAINTENANCE Automatic mode (1450W max.) IMPORTANT! Before cleaning your wet & dry vac or carrying out any maintenance Connect the power cable on your device procedures, make sure that the motor is off and the vac is disconnected from the Fig.
DESCRIPTION OF SYMBOLS KNOW YOUR PRODUCT CONTENTS 1 x FBWDV-40PTU Wet & dry vac 1 x Main handle 2 x Wheels 2 x Castors 2 x Wheel covers 2 x Securing R-clips for wheels 4 x Washers for fitting the wheels...
WARRANTY All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your appliance develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the customer service number shown.
Need help?
Do you have a question about the FBWDV-40PTU and is the answer not in the manual?
Questions and answers