Important Safeguards For Electrical Appliances - Gastroback Design Coffee Grinder Advanced Plus Operating Instructions Manual

• To avoid damage to the grinder: Do not fill pre-ground coffee pow-
der into the bean hopper. Only fill the bean hopper with fresh, dry,
whole coffee beans that are fit for consumption. Do not use the grin-
der for grinding any other materials or food. Always keep the grinder
chamber completely dry.
• Always unplug the appliance, before cleaning the appliance, or
when the appliance is not in use. Additionally, empty the bean hop-
per and interior of the grinder chamber, when the appliance is not in
use for an elongated time. Always hold the machine at the housing
for moving the appliance. Do not hold the appliance at the bean
hopper, grinder head, or power cord for moving the appliance.
• Keep the appliance and its parts and accessories clean (see: 'Care
and Cleaning'). Do not use any abrasive cleaners, cleaning pads
(e.g. metal scouring pads), or any corrosive cleaners (e.g. disinfec-
tants) for cleaning.
• Do not place the grinder in an automatic dishwasher.

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

Place the appliance near a suitable wall power outlet to connect the
appliance directly to a protected mains power supply with protective con-
ductor (earth/ground) connected properly. Ensure that the voltage rating
of your mains power supply corresponds to the voltage requirements of
the appliance (230 - 240 V, 50/60 Hz, AC, rated for at least 8 A). The
installation of a residual current operated circuit breaker (r.c.c.d.) with a
maximum rated residual operating current of 30 mA in the supplying elec-
trical circuit is strongly recommended. If in doubt, contact your electrician
for further information.
• In various foreign countries, the specifications for power supplies are
subject to incompatible norms. Therefore it is possible that power sup-
plies in foreign countries do not meet the requirements for safe opera-
tion of the appliance. Thus, before operating the appliance abroad,
ensure that safe operation is possible.
• Do not use any desk top multi socket outlet, external switching device,
remote control systems, or extension cord to avoid risk of fire or elec-
EN
36