Download  Print this page

Motorola NKN6498 Manual

Headset adapter cable for ht1000, jt1000, mt2000, mts2000, and mtx series handie-talkie portable radios.
Hide thumbs
   

Advertisement

Adapter
Cable
Figure 1: Headset Adapter Cable
Introduction NKN6498
The NKN6498 Headset Adapter Cable is an accessory for Motorola portable
two-way radios. Also available is an NMN1020, which combines the
NKN6498 and an NMN6050. The adapter cable, used in conjunction with
Accessory Adapter BDN6676 (a 3.5mm connector), allows a Safety Helmet
Headset (NMN6050) to be used with HT 1000, JT 1000, MT 2000, MTS 2000,
or MTX Series radios.
Description
The NKN6498 Headset Adapter Cable, with BDN6676 Accessory Adapter,
includes a push-to-talk (PTT) switch, a microphone amplifier circuit, and a
bayonet-type socket for connection to the headset. The BDN6676 provides
, Motorola, HT1000, JT1000, MT2000, MTS2000, and Handie-Talkie
Headset Adapter Cable NKN6498
HT1000™, JT1000
and MTX Series Handie-Talkie
3.5mm
Accessory
Adapter
BDN667
Radio
are trademarks of Motorola, Inc.
© 1997 by Motorola
Radio Products Group
®
, MT2000™, MTS2000™,
®
PTT
Figure 2: Normal Transmit Position
for
Portable Radios

Advertisement

Table of Contents

   Related Manuals for Motorola NKN6498

No related manuals

   Summary of Contents for Motorola NKN6498

  • Page 1 Figure 1: Headset Adapter Cable Figure 2: Normal Transmit Position Introduction NKN6498 The NKN6498 Headset Adapter Cable is an accessory for Motorola portable two-way radios. Also available is an NMN1020, which combines the NKN6498 and an NMN6050. The adapter cable, used in conjunction with Accessory Adapter BDN6676 (a 3.5mm connector), allows a Safety Helmet...
  • Page 2 Refer to the applicable radio operating instructions. To use the radio with the headset, follow this procedure: Connect the NKN6498 adapter cable to the BDN6676 accessory adapter by screwing them together until hand tight. Attach the BDN6676 accessory adapter to the radio external acces- sory connector.
  • Page 3 Instruction Sheet for Headset Adapter Cable NKN6498 Disassemble the adapter cable using two shop rags and two gas- type pliers. Attach the headset plug onto the adapter bayonet-type socket so as to stabilize the adapter and protect the bayonet-type connector from being deformed. Use a shop rag around the headset plug and another shop rag around the housing (item no.
  • Page 4 Instruction Sheet for Headset Adapter Cable NKN6498 *6881085C84* 68P81085C84-O...

Comments to this Manuals

Symbols: 0
Latest comments: