Cleaning Hard Floors - Vapor Clean Pro6 Solo User Instructions

LARGE CLEANING BRUSH (10 - 1 OA)

Cleaning hard floors

Stick the extension tube onto the spray pistol and attach the large cleaning brush to the
extension tube. Pass over the floor with even movements.
Pause a bit longer over joints and uneven places, to dissolve deeply-ingrained dirt. Repeat
several times if necessary.
Finally, clamp a dry wipe cloth around the brush and wipe the whole surface clean.
The floor will shine like new.
For linoleum, proceed carefully, using very little steam; or, better yet, use a dry wipe cloth
to retain the floor's natural brilliance.
Cleaning carpets with the brush cover
Using the PRO6 Solo, textile wall-to-wall carpets, rugs and even Persian carpets can be
cleaned and disinfected, eliminating even animal hair and house mites, without chemicals
and additives, restoring the original colour and providing renewed brilliance.
The elimination of deeply ingrained dirt and detergent residues left over from previous cle­
aning attempts may require several treatments for the best results.
For after-treatment, simply repeat the process, using a dry wipe cloth clamped over the
brush attachment.
For first-time cleaning following the process, use a vacuum cleaner only.
Slide the brush cover (10a) over the brush (10) and allow it to latch into place. This allows
the attachment to glide easily and smoothly over the floor, without damaging the carpeting,
aspirating away any dirt as a result of the steam vortex effect and resulting under-pressure
generated around the brushes by the brush cover.
8