Safety Instructions - Vapor Clean Pro6 Solo User Instructions

1) Never open the filler cap while the boiler is under pressure. Release the pressure using
the steam button on the pistol grip only.
2) Do not add detergents or other additives. Use only filtered water- no distilled water.
2) Take care to ensure that the electrical data on the type plate corresponds to the local net­
work voltage.
4) Never dip the device in the water.
5) Disconnect plug when the device is not in use or is to be left unattended, or when filling
the tank or cleaning the device.
6) You must only use the PRO6 Solo for the applications described in these instructions.
7) Use only original replacement and accessory parts.
8) Do not pull the electrical cord out of the socket by the cord.
9) Do not allow the electrical cord to come into contact with hot surfaces.
The steam generated by the device can reach very high temperatures (150
leaving the device. Avoid all contact with the steam. Do not point the steam spray at per­
sons or animals.
This device is not a toy. Special care is required when used by children or in the
vicinity of children.
Never use steam to clean electrical devices, such as radios, televisions.
13) When using the electric iron, take care to ensure that the iron is safely stowed at all
times (for example, the support base on the table).
Only put the PRO6 Solo away after it has completely cooled off. The tank need not be
emptied unless the device is to remain unused for a long time.
Do not use the device if it has been damaged, steam escaping or if the electrical cord
or any of the accessory parts are damaged. Inspections and repairs of all kinds must
always be performed by our client service department. Unauthorized repair work may be
dangerous and will void the warranty.

SAFETY INSTRUCTIONS

Please test inconspicuous parts of all surfaces and objects to ensure colour-fastness
and heat resistance. We will not be liable for damage caused by failure to test the
surfaces to be cleaned.
10)
11)
12)
14)
15)
4
C) upon
°