Filling The Boiler - Vapor Clean Pro6 Solo User Instructions

Versatile steam cleaning system
Table of Contents

Advertisement

WINDOW WIPER {15)
To get dirt and grease off windows has never been easier. Fit the machine with the appro­
priate window accessory Direct steam onto the windows and get rid of the dirt with the rub­
ber squeegie. Jet nozzle and fogg the window and clean with microfiber towel provides
excellent results
Attention: In winter pre-heat the windows!Start cleaning only after spraying some
steam from a distance of about 5-l0cm.

FILLING THE BOILER

If the steam of the DIAMANT finishes while using the machine, the "water level" warning
light lights up. The boiler must then be refilled with water.
Proceed as follows:
le.
Leave steam switch (3) on
2c. Turn off the main switch 4.
3c.
Operate steam trigger (Gl) on handle
4c.
Disconnect electrical cord from the wall socket (9).
5c.
Unscrew safety plug (1) turning it in an anticlockwise direction.
6c. Wait for a few minutes to let the boiler cool down.
7c.
Fill the machine as described in the GETTING STARTED chapter. If filling the tank
when hot, add small quantities of water in order to prevent water from evaporating straight
away. To fill the tank use filler bottle (21).
8c. Close the machine and plug it in again, switch the general switch on and wait for "pres­
sure" light (6) to light up.
9c. The PRO6 Solo is ready for use again!
10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro6 Solo and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents