Skully Fenix AR Quick Start Manual page 6

USING
YOUR
FENIX AR
CHARGE YOUR FENIX
AR BEFORE RIDING
A Micro-USB connector is
attached to the ratchet strap
on your helmet. Plug the sup-
plied wall charger into the
connector to charge your
battery. LED lights will blink
on your helmet indicating
charging.
POWERING ON
Find the control button on the
bottom left inside the helmet.
• Press button once brief-
ly to turn on. You will see
the lights on the FENIX AR
flash and the HUD will
turn on.
• Press and hold button for
6 seconds to turn off.
BATTERY INDICATORS
You can easily check the
battery life of your FENIX AR
either by looking at the LED
indicators on the rear of the
helmet when plugged in or
saying:
"OK SKULLY, Check Battery"
LED indicators are show be-
low, and a full list can be
found in the User's Manual.
WHILE ON CHARGER
FULL CHARGE
2/3 CHARGE
1/3 CHARGE