PDi PD181-660 Manual

Your Source for Healthcare and
Wellness Infotainment ™

SCOPE:

TO ATTACH A 42, 43 OR 50 ELED TV TO A PD181-660 TABLE STAND USING A PDI BRACKET KIT (PURCHASED SEPARATELY)

SAFETY STEPS:

1. ALWAYS WEAR SAFETY GLASSES/GOGGLES TO PREVENT INJURY FROM DEBRIS.
2. FOLLOW THE INSTALLATION/REMOVAL INSTRUCTIONS FOR YOUR EXISTING PRODUCTS.

TOOLS:

1. P1 OR P2 PHILLIPS SCREWDRIVER
2. 1/4" HEX BIT DRIVER
3. SAFETY GLASSES/GOGGLES

PROCEDURE:

1. SECURELY MOUNT PD181-620 STAND (#1) TO TABLE SURFACE USING 1/4" FASTENERS (CUSTOMER SUPPLIED).
2. ATTACH THE VERTICAL WALL MOUNT BRACKET FROM CHOSEN MOUNT KIT (#7) TO THE PD181-620 STAND (#1) USING THE
PD181-619 NUT PLATE (#2), AND PDIBSHCS252050 BUTTON SOCKET HEAD CAP SCREWS (#3). THIS MOUNT HAS AN
ADJUSTABLE MOUNTING HEIGHT FEATURE. DETERMINE THE PROPER MOUNTING HEIGHT AND SECURELY TIGHTEN THE
TWO 1/4 -20 X 1/2 BUTTON SOCKET HEAD CAP SCREWS.
3. NEXT, MOUNT THE ELED TV USING PARTS SUPPLIED WITH CHOSEN MOUNTING KIT.
4. FINALLY, ATTACH PD181-618-S (#4) TO PD181-620 (#1) USING SIX PDIPPHMS103250 SCREWS (#5), THEN BOLT THE LEG TO
THE TABLE USING 1/4"FASTENERS (CUSTOMER SUPPLIED).
ITEM PART NUMBER
1 PD181-620
2 PD181-619
3 PDIBSHCS 2520 50
4 PD181-618-S
5 PDIPPHMS103250
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PD181-660
Bolt Down TV Table Stand
PARTS LIST
DESCRIPTION
STAND
NUT PLATE
1/4 – 20 X 1/2 BUTTON SOCKET HEAD CAP SCREW
STIFFENER: FOR LARGE SCREEN TABLE MOUNT
PHILLIPS PAN HEAD MACHINE SCREW 10-32 X ½
*E42 shown for reference*
Document Number:
PD196-177R4
Page 1 of 3
QTY
1
1
2
1
6