Table of Contents
Advertisement
Chapter 3
Removing and Installing Port Adapters
Connecting the PA-4B-U Interface Cables
On a single PA-4B-U, you can use up to four Basic Rate Interface (BRI) connections.
To connect a PA-4B-U interface cable, follow these steps:
Step 1
Attach the cable directly to the receptacle on the PA-4B-U. (See
Note
Step 2
Attach the network end of the cable to your RJ-45 wall jack.
Figure 3-2
This completes the procedure for attaching a PA-4B-U interface cable.
OL-3521-02
Port adapters have a handle attached, but this handle is not shown to allow a detailed view of
each port adapter's faceplate.
Connecting a PA-4B-U Interface Cable—PA-4B-U Front View
RJ-45 cable (up to four)
To ISDN network
PA-4B-U Basic Rate Interface Port Adapter Installation and Configuration
Connecting the PA-4B-U Interface Cables
Figure
3-2.)
3-7
Advertisement
Table of Contents
